382175
62
Zoom out
Zoom in
Previous page
1/102
Next page
GB
62
Assembly
Remove the motor device and the accessories from the box. Also remove any
packaging materials that may be present.
High-Pressure Hose (7)
Connect the high-pressure hose (7) to the high-pressure outlet (2). Turn the con-
nection in a clockwise direction until it his hand tight on the screw thread.
Standpipe
The standpipe (4) can only be screwed on to the hand spray gun (8). Turn the
standpipe in a clockwise direction until it his hand tight on the hand spray gun.
Jet pipe with nozzle
The jet pipe (5) with nozzle can only be attached to the standpipe (4). These
components have a quick-acting closure (13).
The connection is locked by pressing and turning simultaneously in a clockwi-
se direction.
The connection is opened by fi rst pressing the components together and then
turning the pipe in an anticlockwise direction.
Detergent Container
The detergent vessel can only be attached to the high-pressure nozzle (11).
Before you can attach the detergent vessel it is necessary to turn the two plates in
the nozzle together by turning the high-pressure nozzle (11).
The detergent container consists of 2 components.
1. Connection with nozzle.
Affi x the connection to the high-pressure nozzle (11)
and press it using small up-and-down movements until the catch locks into
place on the nozzle. Release the connection by lifting the catch.
2. The container.
After fi lling this is attached to the connection and locked into
place by means of a short twist in a clockwise direction.
Connection Requirements
Electrical connection
Only connect the machine to a properly installed safety socket, 230 V/50 Hz.
Before inserting the mains lead into the socket, check whether the voltage you
intend to use complies with that of the machine.
Extension Leads
Only extension leads that are protected against water spray should be used with
high mechanical strength and an internal diameter of at least 3 x 1.5 mm
2
.
6....-05-HDR 2941 62 07.01.2005, 14:32:16 Uhr
62


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Clatronic hdr 2941 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Clatronic hdr 2941 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish, Norwegian as an attachment in your email.

The manual is 1,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info