Manual Clatronic es 2657 (page 35 of 59) (English, German, Dutch, French, Italian, Polish)

361372

Zoom out

Zoom in

1/59

3. Fill the container up to a 1/3 with fresh cold milk (warm, hot or stale milk does

not froth).

4. Switch the steam function switch (7) on.

5. Dip the steam nozzle (8) slightly below the surface of the milk in the container

and turn the function selector (3) to the left (Steam symbol).

6. Move the container slightly up and down. Once the milk reaches the desired

volume, you can warm the milk more by lowering the steam nozzle (8) to the

bottom of the container. Do not make the milk boil or the froth will be ruined.

7. Turn the function selector (3) back to the O position and switch the device off

with the On/Off (O/I) (6) switch.

8. Scoop out the froth into the espresso. Add liquid milk. A cappuccino is usually

composed of 1/3 coffee, 1/3 hot milk and 1/3 frothed milk.

Your cappuccino is now ready. Improve the flavor by adding some cinnamon or cho-

colate powder.

Hot Water

You can even use the Espresso machine to make tea, hot drinks and meat soups.

Make sure that the tank has enough cold water.

1. Switch on the device with the On/Off (O/I) (6) switch. Both LED’s (4 – 5) to the

left and right of the function selector light up.

2. Switch the steam function button (7) to the liquid symbol.

3. Swing the steam nozzle out so and position a heat-resistant container under the

steam nozzle.

4. When the READY LED (5) is off, the water has reached the right temperature

and the function selector (3) can be turned to the left to Steam position.

5. The hot water now flows into the container.

6. Once this procedure is over, Turn the function selector (3) back to the O position

and switch the device off with the On/Off (O/I) (6) switch.

Cleaning

After frothing milk, the steam nozzle is to be immediately cleaned from all milk resi-

dues.

If the milk dries, it becomes difficult to remove. Soak the steam tube in a container

with water over night so that the milk residue softens. Place a heat-resistant contai-

ner full of water under the nozzle so that the nozzle is dipped in the water. Turn the

function selector to Steam position. Wipe the steam nozzle with a moist cloth to

remove the milk residue before it hardens. The water tank, drip tray, drip tray cover,

filter, filter holder and the hotplate can be washed by hand in a sink with warm

water. Do not use abrasive detergents. Wash the parts regularly. If the filter’s holes

are clogged, clean it with a fine brush.

Do not wash the machine.

Never wash the parts or accessories in a dishwasher. The drip tray has an overflow

protection. A red-marked “float” is found in the tray. The more water the drip tray

44681-05-ES 2657 22.05.2003 16:52 Uhr Seite 35

How do I get Guan Screen for this machine, where I live in Egypt, thanks Submitted on 11-9-2020 at 17:01
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Clatronic es 2657 in the language / languages: English, German, Dutch, French, Italian, Polish as an attachment in your email.

The manual is 0,81 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Clatronic es 2657 Manual

Product: