Manual Clatronic es 2612 (page 43 of 66) (English, German, Italian, Polish, Portuguese, Spanish)

362101

Zoom out

Zoom in

1/66

2. Swing the steam valve outwards. This way you are able to place the jug (please

use a heat resistant jug) comfortably under the valve. Hint: Place an empty jug

under the valve, close the steam control switch and for partly opening the steam

valve please turn counter clockwise so all condensation build within the steam

valve can escape.

3. Close the steam valve.

4. Fill the jug one third with fresh cold milk (warm, hot or old milk will not froth).

5. Immerse the steam valve just below the surface of the milk and open the steam

valve. To regulate the quantity of steam turn the steam control knob.

6. Move the jug slightly up and down. Once the milk has reached the desired volu-

me you can heat it up even more by immersing the steam valve almost to the

bottom of the jug. Do not boil the mild because the froth will be destroyed.

7. Turn the steam control knob clockwise to close the steam valve. Press the

steam button again, to stop the steam.

8. Spoon the foam into the espresso than Add liquid milk. Cappuccino usually con-

sists of one third coffee, one third hot milk and one third frothed milk.

Your cappuccino is now ready to be served. Sprinkle sugar, chocolate powder

or cinnamon on top.

Cleaning the steam valve

• After frothing the steam valve should be cleaned immediately.

• Once the milk has dried on, it will be very hard to remove it. Soak the steam

pipe over night in a cup of water to remove the milk. Put a heat resistant jug fil-

led with water under the valve and open the steam valve. Wipe the steam valve

with a damp towel, to remove the milk. If you would like to proceed making

espresso after producing steam, put an empty jug under the brew head. Press

the pump button, to refill the water supply for the heating system. When water

runs out the brew head and the steam- and the readiness lamp switch of relea-

se the pump button. Wait until the readiness light switches on again.

Producing Steam

• You can easily heat up and prepare tea, soup etc.

• Proceed as described under 1 –7 „making Cappuccino” but instead of milk plea-

se pour the liquid to be heated in the jug.

• During producing steam please close the steam valve entirely. In case the

steam control lamp switches off or no steam is being produced, the water tank

is possibly empty. Press the pump button and as soon as water runs out the

brew head release the pump button. Please wait until the steam and readiness

lamp switch on. Then you can proceed producing steam as explained above.

Please Note: Whilst using the steam function water can spill out the steam

valve, this is entirely normal. However caution should be taken to avoid scal-

ding.

5....-05-ES 2612 + P, CZ 02.09.2003 9:09 Uhr Seite 43

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Clatronic es 2612 in the language / languages: English, German, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 0,99 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Clatronic es 2612 Manual

Product: