Manual Clatronic es 2612 (page 42 of 66) (English, German, Italian, Polish, Portuguese, Spanish)

362101

Zoom out

Zoom in

1/66

2. Swing the steam valve outwards and place a jug under the valve. After swit-

ching the equipment on and opening the steam control switch please turn the

knob counter clock wise. This opens the steam valve entirely.

3. Now, please press the pump button. Water is passed from the percolating head

to the steam nozzle. Allow the water to flow for at least one to two minutes

through the steam nozzle.

4. After ventilation via the steam valve please release the pump button and close

the steam control switch clock wise to close the steam valve completely.

We advise to ventilate the equipment via the steam valve and afterwards via the

brew head (this way you will be able to remove all air bubbles out the system) to

heat up the system.

Making Espresso

Please remember, Espresso has to be finer than regular percolator coffee.

1. Insert the plug into a 230 V /50 Hz socket, installed according to existing regula-

tions and with earth protection.

2. Please fill fresh cold water into the tank and switch on the ON/OFF switch. The

control lamp on the switch lights up.

3. Push the PUMP button. As soon as water runs out the brew head, release the

PUMP button, to stop the pump and wait until the readiness light comes on. The

water has reached the optimal temperature.

4. Insert the filter into the holder. Fill with 1 – 2 levelled spoons of coffee. Make

sure the coffee is spread evenly and press lightly with a measuring / pressing

spoon. Please remove carefully all obsolete coffee from the filter rim.

5. Insert the filter into the brew head and turn the handle towards LOCK (the filter

is properly locked in place, when the handle is positioned in the middle of the

machine). Place the espresso cup(s) under the brew head.

When the readiness lamp lights up press the pump button and espresso start

running into the cup(s). Your machine is working with approx. 15 bar pressure.

When the readiness lamp switches off, release the pump button to stop the pro-

cedure.

After brewing please wait several seconds, before removing the filter. Turn the

handle of the filter (from right to left) to release it. Attention: Pressure! To empty

the filter, please use the small special lever to hold the filter in place. Turn the fil-

ter upside down and tap out the used coffee grain. Please remove the filter after

each brewing process. This will prolong the live of the rubber gasket in the brew

head. To produce further espresso please refill the filter and wait until the rea-

diness lamp switches on again and proceed as described above.

Making Cappuccino

To froth milk please proceed as follows:

1. Press the steam button and wait until the steam and readiness lamp lights up.

5....-05-ES 2612 + P, CZ 02.09.2003 9:09 Uhr Seite 42

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Clatronic es 2612 in the language / languages: English, German, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 0,99 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Clatronic es 2612 Manual

Product: