138680
74
Zoom out
Zoom in
Previous page
1/75
Next page
74
Disc handling and
maintenance
Handling precautions
Hold the disc by the edges so the surface
will not be soiled with fingerprints.
Fingerprints, dirt and scratches can
cause skipping and distortion.
Do not write on the label side with a ball-
point pen or other writing utensils.
Do not use record cleaning sprays,
benzine, thinner, static electricity
prevention liquids.
Be careful not to drop or bend the disc.
Do not install more than 1 disc on the
disc tray.
Do not try to close the disc tray when the
disc is not installed properly.
Be sure to store the disc in its exclusive
case when not in use.
If the surface is soiled
Wipe gently with a soft, damp (water
only) cloth.
When wiping discs, always move the
cloth from the centre hole toward the
occur, which will not cause noise.
(If you wipe the discs using a circular
motion, circular scratches are likely to
occur, which will cause noise.)
If the disc is brought from a cold to a
warm environment moisture may form
on the disc.
Wipe this moisture off with a soft, dry,
lint-free cloth before using the disc.
Improper disc storage
You can damage discs if you store them in
the following places:
Areas exposed to direct sunlight
Humid or dusty areas
Areas directly exposed to a heat outlet or
heating appliance
Maintenance
Be sure to press POWER to set the
player to the standby mode and
disconnect the AC power cord before
maintaining the player.
Wipe this player with a dry, soft cloth.
If the surfaces are extremely dirty, wipe
clean with a cloth which has been dipped
in a weak soap-and-water solution and
wrung out thoroughly, and then wipe
again with a dry cloth.
Never use alcohol, benzine, thinner,
cleaning fluid or other chemicals. And do
not use compressed air to remove dust.
MACROVISION Information
This DVD/VCD/CD player is protected by
MACROVISION and no unauthorized copy
can be made by VIDEO CASSETTE
RECORDER.
This product incorporates copyright
protection technology that is protected by
method claims of certain U.S. patents and
other intellectual property rights owned by
Macrovision Corporation and other rights
owners. Use of this copyright protection
technology must be authorized by
Macrovision Corporation, and is intended
for home and other limited viewing uses
only unless otherwise authorized by
Macrovision Corporation. Reverse
engineering or disassembly is prohibited.
74


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Clatronic dvd 657 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Clatronic dvd 657 in the language / languages: English, German as an attachment in your email.

The manual is 7,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info