Manual Clatronic cl 3134 (page 19 of 22) (English, German, Italian)

133738

Zoom out

Zoom in

1/22

ENGLISH

The device displays the selected settings on the control panel

(Fig. 3).

1. Turn the device off with the „

“ button (J/13).

2. Brieﬂ y press the „ “ button (B/17) to change to the time

setting mode. The digital display on the control panel ﬂ ashes

and shows 00. The „ “ control lamp lights up in green.

3. In order to programme the timer, press the „

“ button (B/17)

repeatedly. The length of time increases by 1 hour with

every press of the button (00, 01, 02.....24, then from the

beginning again).

4. After the set time has expired, the device switches on.

If you would like to switch off the timer before the time has

expired, press the „

“ button (B/17) repeatedly until the digital

display shows 00. The timer is now switched off.

• Press the „

“ button (C) to switch on the sleep mode.

• In sleep mode the ventilation speed is preset to low (orange

lamp).

• The speed can be set or changed by pressing the „

“

button (G/15).

• In sleep mode the previously selected temperature increa-

ses by 1°C after 1 hour and by a further 1°C after 2 hours.

• In order to switch sleep mode off again, press the „

“ button

once more.

Dehumidifying

When the device is operated in the „dehumidify“ mode you

should allow the exhaust air to ﬂ ow back into the room.

During dehumidiﬁ cation only the low ventilator speed is possible

(„

“ control lamp lights up in orange). In this mode of

operation it may be necessary to empty the condensation

container more frequently (see section on „Emptying the Water

Container“).

Air Outlet

• Press the „

“ button (J/13) to open the air outlet.

• Press the „

“ on (A/1

) and the air outlet moves conti-

nuously up and down.

• The movement is stopped by repeatedly pressing the „

“

button and the air slit remains in this position. The direction

of the airﬂ ow is then constant.

• Once the „

“ button has been pressed the air outlet closes.

Emp

tying the Water Container

Under conditions of high humidity it may be necessary to empty

the internal condensation container. When the water container is

full, an acoustic signal is heard 15 times. The device switches off

automatically and the „

“ (K) control lamp lights up in red. In

order to empty the water container, please proceed as follows:

• Turn the device off („

“ control lamp lights up in red) and

remove the plug from the socket.

CAUTION:

Do not move the device, as otherwise this might

cause the water to leak out and damage the ﬂ oor,

carpet or device.

• Place the collecting pan supplied on the ﬂ oor under the

outlet (12) of the device (see Fig. 5).

Fig. 5

• Remove the rubber bung from the outﬂ ow and allow the

water to drain out (Fig. 6).

Fig. 6

CAUTION:

Do not remove from the device during the emptying

process! As the internal water container can hold up to

3 litres it is necessary to close the outﬂ ow from time to

time and empty the collecting pan. Repeat the process if

necessary until no further water ﬂ ows out of the device.

• Close the outﬂ ow again with the rubber bungs. Insert the

plug into the socket and switch the device on. The red water

full display is switched off.

ޥ NOTE: Empty the water container regularly.

Air Filters

The air conditioner is equipped with two protective ﬁ lters in order

to clean the air in the room.

ޥ NOTE:

When the device has been running for more than 100 hours

the digital display (E) ﬂ ashes to remind you that the ﬁ lter

should be cleaned. Press the „

“ and „

“ buttons simultane-

ously to stop the digital display from ﬂ ashing.

05-CL 3134 19 14.12.2007, 14:17:36 Uhr

Sleep Mode

Please wait until the device has begun operation as described

under the section „Switching on/off“, or if the device is already

working, please proceed as follows:

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Clatronic cl 3134 in the language / languages: English, German, Italian as an attachment in your email.

The manual is 5,68 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Clatronic cl 3134

Clatronic cl 3134 User Manual - Dutch - 14 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Clatronic cl 3134 Manual

Product: