319587

Clatronic bss 1261 Manual

38
Zoom out
Zoom in
Previous page
1/60
Next page
ENGLISH
ENGLISH
42
• Empty the collection container and rinse with water (illustra-
tion F10).
• Wipe the container dry with a cloth (illustration F11).
• Clean the motor protection fi lter by washing by hand and
allow it to dry.
ޥ NOTE:
The suction hose should only be reassembled after it has
dried (illustration F15).
• The motor housing, the cleaning agent tank and the other
hoses can be reassembled at this point (illustration F12-14).
• “Park” the accessories on the motor housing (illustration
F16).
CAUTION:
• Whenever wet cleaning has been carried out the individual
parts of the vacuum cleaner (suction pump, valve, nozzles
and hoses) have to be rinsed through with clean water.
• To this purpose you should pump approx. 2 litres of water
from a bowl through the system.
G – Cleaning and Maintenance
• Pull the plug out of the socket (illustration G1).
• In order not to damage the surfaces, please do not use any
abrasive detergents or scratching cleaning utensils.
Collection Vessel
• Rinse out the collection vessel after use with clean water
(illustration G4, G5).
• Any dirt in the vessel can be removed with a sponge or
nylon brush.
Outlet Filters
The outlet fi lters (14) are located at the top of the motor housing
(illustration G7). Clean the fi lters every 7 to 10 times the device
is emptied.
• Quick cleaning: Tap or brush out the fi lter in order to
remove any residues.
• Hand wash: If soiling is severe we recommend a hand
wash up to 40°C.
ޥ NOTE:
• Only let the fi lters dry in the air!
• Only operate the vacuum cleaner with dry fi lters!
Motor Protection Filter
The motor protection fi lter (23) is located at the bottom of the
motor housing. You should clean the motor protection fi lter every
third to fi fth time it is emptied.
• Remove the motor housing and take out the fi lter.
• Quick cleaning: Tap or brush out the fi lter in order to
remove any residues.
• Hand wash: If soiling is severe we recommend a hand
wash up to 40°C (illustration G6).
ޥ NOTE:
• The fi lter should only be allowed to dry in the air!
• Only use the vacuum cleaner again when the fi lter is dry!
Housing
• The housing can be wiped off with a slightly damp cloth
(illustration G10). Do not immerse the motor into water!
• Dry off all parts after cleaning with a dry cloth.
Maintenance
• In order to ensure that the vacuum cleaner remains effi cient
and in good working order it may occasionally be necessary
to clean the hoses or accessories (illustration G8, G9).
• You should replace the dust bags regularly (illustration G11).
Storage
Store the device in a dry room away from frost.
• Empty the collection vessel completely.
• Reattach the motor housing.
• Wind up the lead.
H – Notes on Handling the Cleaning Agent
The cleaning agent is a concentrate for the deep cleaning of
fl oors, textile fl oor coverings and carpets. The agent only foams
to a small extent and is therefore ideal for use in the wet vacuum
cleaner.
Mixing Ratio
• Mix 3-5 measuring beakers of the cleaning agent with
5 litres of water (mixing ratio 1:200).
• The mixing beaker is included in the accessories (illustration
H4).
• First pour the cleaning agent into the tank (illustration H5).
• Then fi ll the tank up to the maximum mark with cold water
(illustration H6).
Consumption
• 1 litre of the diluted mixture is enough to clean 5 square
metres of fl oor area. However, the effect depends on the
degree of soiling.
CAUTION:
• Before use you should check the dosage and the effect of
the cleaning agent on a small inconspicuous area.
• You should not spray on too much cleaning agent in order
that the covering does not become too wet.
WARNING:
Keep the cleaning agent out of the reach of children.
• Eye contact: rinse out with water.
• Skin contact: rinse off with water.
• If swallowed: drink water
do not induce vomiting
consult a doctor
05-BSS 1261 Inhalt 42 13.11.2006, 9:27:11 Uhr
… 38 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Clatronic bss 1261 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Clatronic bss 1261 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish, Norwegian as an attachment in your email.

The manual is 0,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info