Manual Clatronic bss 1261 (page 36 of 60) (English, German, Dutch, French, Italian, Portuguese, Spanish, Norwegian)

319587

Zoom out

Zoom in

1/60

ENGLISH

Overview of the Components

1 Handle 16 Closure

2 Trigger for cleaning agent 17 Tank for cleaning agent

3 Suction tube, 2-part. 18 Collection vessel

4 Clamp 19 Runner

5 Motor switch (MOTOR) 20 Chassis

6 Pump switch (PUMP) 21 Castors

7 Coupling

8 Inlet hose

Accessories:

9 Suspension device 22 Cleaning agent

10 Large washing nozzle 23 Motor protection ﬁ lter

11 Wet attachment, 24 Measuring beaker

smooth ﬂ oors 25 Crevice nozzle

12 Vacuum hose 26 Permanent ﬁ lter (optional)

13 Carrying handle 27 Dust bag

14 Cover for outlet ﬁ lter 28 Small washing nozzle

15 Inlet hose for cleaning 29 Floor brush

agent 30 Upholstery nozzle

Instructions for Use

Intended Use

• The device is intended for use as a wet/dry vacuum cleaner

in accordance with its description and safety instructions.

• The device also has an additional connection with cleaning

function.

• Any other type of use is considered to be in contradiction of

the intended use and is not permitted.

Nozzle Attachment

Crevice nozzle: For vacuuming in corners and crevices

etc.

Upholstery nozzle:

(only for dry

cleaning)

For vacuuming upholstery, curtains etc.

Floor brush:

(only for dry

cleaning)

To clean carpets or smooth surfaces.

Smooth

ﬂ oors:

Press the lever down with your foot. The

brush is now visible.

Carpets: Press the lever In the opposite direction.

The brushes are now retracted.

Large washing

nozzle: ( for wet

cleaning)

For larger surfaces, such as carpets or

tiles etc. This brush is also ideally suited

to soaking up water from large surfaces.

Small washing

nozzle: (for wet

cleaning)

Suitable for cleaning smaller surfaces,

such as upholstery.

Releasing the

nozzles:

Pull these off while turning slightly.

A – Assembling the Device

• N Take the device and the accessories out of the packaging.

• Release the catches in order to separate the motor housing

from the collection container (illustration A1, A2, A3).

• The accessories include the rollers, which you should attach

to the chassis (illustration A4, A5).

• The motor protection ﬁ lter has to be attached to the bottom

of the motor housing (illustration A6).

• If you would like to carry out dry vacuuming, please insert

a dust bag (illustration A7).

• Reattach the motor housing to the collection container.

• Attach the inlet hose for the cleaning agent (15) to the tank

and then to the connection of the motor housing.

• Attach the suction hose to the motor housing (illustration

A10).

• The accessories include the suspension device for the

“parking aid”. Attach this suspension device to the suction

tube with the screw (illustration A11).

• Attach the required accessory to the suction tube.

• The remaining accessories can be stored in the motor

housing (illustration A12).

B – Wet Vacuuming without Cleaning Agent

• During wet vacuuming only the motor protection ﬁ lter in the

motor housing (23) is used (illustration B1, B2).

ޥ NOTE:

The paper dust bag is not used during wet vacuuming. It

should be removed from the vacuum cleaner.

• The accessories include a rubber lip for the large washing

nozzle. This makes it easier to vacuum up liquids (illustration

B3, B4).

• When the liquid has reached the maximum height in the

collection container, a ﬂ oat closes off the ﬂ ow of air to the

motor. The sound of the motor becomes louder and indica-

tes that the container needs emptying.

• Turn the vacuum cleaner off and remove the plug from the

socket (illustration B5, B6).

• If you would like to stop vacuuming completely, empty the

collection container and wipe it with a cloth (illustration B7,

B8).

• Allow the motor protection ﬁ lter to dry.

C – Dry Vacuuming

• During dry vacuuming the dry motor protection ﬁ lter and a

paper dust bag are used (illustration C1).

• Place a new dust bag on the connection. Check that the bag

is ﬁ rmly in place.

• When the dust bag is attached to the connection it should

be pressed down as far as it will go.

• Insert the mains plug into the socket and turn the device on

with the “MOTOR” switch (illustration C5, C6).

• The dust bag is changed when required.

• If the suction power of the device is reduced the bag should

be replaced.

• Please use the ﬂ oor nozzle for dry vacuuming (illustration

C3).

05-BSS 1261 Inhalt 40 13.11.2006, 9:27:07 Uhr

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Clatronic bss 1261 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish, Norwegian as an attachment in your email.

The manual is 0,79 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Clatronic bss 1261 Manual

Product: