Manual Clatronic bba 2605 (page 49 of 66) (English, German, Dutch, French, Spanish)

379718

Zoom out

Zoom in

1/66

ENGLISH

Problem Cause

Solution

Mushroom-like,

unbaked surface

– Bread volume too big for the

tin

a/f

– Too much ﬂ our, especially for

white bread

– Too much yeast or not

enough salt

a/b

– Too much sugar a/b

– Sweet ingredients besides the

sugar

The slices are

uneven or there

are clumps in

the middle

– Bread not cooled enough (the

vapor has not escaped)

Flour deposits

on the bread

crust

– The ﬂ our was not worked

well on the sides during the

kneading

g/i

Solutions for the problems

a) Measure the ingredients correctly.

b) Adjust the ingredient doses and check that all the ingre-

dients have been added.

c) Use another liquid or leave it to cool at room temperature.

Add the ingredients speciﬁ ed in the recipe in the right order.

Make a small ditch in the middle of the ﬂ our and put in the

crumbled yeast or the dry yeast. Avoid letting the yeast and

the liquid come into direct contact.

d) Use only fresh and correctly stored ingredients.

e) Reduce the total amount of the ingredients, do not use

more than the speciﬁ ed amount of ﬂ our. Reduce all the

ingredients by 1/3.

f) Correct the amount of liquid. If ingredients containing water

are used, the dose of the liquid to be added must be duly

reduced.

g) In case of very humid weather remove 1-2 tablespoons of

water.

h) In case of warm weather do not use the timing function. Use

cold liquids.

i) Take the bread out of the tin immediately after baking and

leave it on the grid to cool for at least 15 minutes before

cutting it.

j) Reduce the amount of yeast or of all the ingredient doses by

1/4.

k) Never grease the tin!

l) Add a tablespoon of wheat gluten to the dough.

Remarks on the Recipes

1. Ingredients

Since each ingredient plays a speciﬁ c role for the successful

baking of the bread, the measuring is just as important as the

order in which the ingredients are added.

• The most important ingredients like the liquid, ﬂ our, salt,

sugar and yeast (either dry or fresh yeast can be used)

affect the successful outcome of the preparation of the

dough and the bread. Always use the right quantities in the

right proportion.

• Use lukewarm ingredients if the dough needs to be prepared

immediately. If you wish to set the program phase timing

function, it is advisable to use cold ingredients to avoid that

the yeast starts to rise too early.

• Margarine, butter and milk affect the ﬂ avor of the bread.

• Sugar can be reduced by 20% to make the crust lighter

and thinner without affecting the successful outcome of the

baking. If you prefer a softer and lighter crust replace the

sugar with honey.

• Gluten which is produced in the ﬂ our during the kneading

provides for the structure of the bread. The ideal ﬂ our

mixture is composed of 40% wholemeal ﬂ our and 60% of

white ﬂ our.

• If you wish to add cereals grains, leave them to soak

overnight. Reduce the quantity of ﬂ our and the liquid (up to

1/5 less).

• Leaven is indispensable with rye ﬂ our. It contains milk and

acetobacteria that make the bread lighter and ferment

thoroughly. You can make your own leaven but it takes time.

For this reason concentrated leaven powder is used in the

recipes below. The powder is sold in 15g packets (for 1 kg of

ﬂ our). Follow the instructions given in the recipes (1/2, _ or 1

packet). If less leaven that requested is used the bread will

crumble.

• If leaven powders with a different concentration (100 g

packet for 1 kg of ﬂ our) are used, the quantity of ﬂ our must

be reduced by 80 kg for a 1 kg of ﬂ our.

• Liquid leaven sold in bags is also available and it is suitable

for use. Follow the doses speciﬁ ed on the package. Fill the

measuring beaker with the liquid leaven and top it up with

the other liquid ingredients in the right doses as speciﬁ ed in

the recipe.

• Wheat leaven which often comes dry improves the workabi-

lity of the dough, the freshness and the taste. It is milder that

rye leaven.

• Use either the NORMAL or VOLLKORN program when

baking leavened bread.

• Baking ferment can used to replace the leaven. The only

difference is in the taste. It is ﬁ t to be used in the bread

baking machine.

• Wheat bran is added to the dough if you want particularly

light bread rich in roughage. Use one tablespoon for 500 g

of ﬂ our and increase the quantity of liquid by _ tablespoon.

• Wheat gluten is a natural additive obtained from wheat

proteins. It makes the bread lighter and more volumino-

us. The bread falls in more rarely and it is more easily

digestible. The effect can be easily appreciated when baking

wholemeal and other bakery products made of home-milled

ﬂ our.

• The black malt used in some recipes is dark-roasted barley

malt. It is used to obtain a darker bread crust and soft part

(e.g. brown bread). Rye malt is also suitable but it is not as

dark. You can ﬁ nd this malt in whole food shops.

• Pure lecithin powder is a natural emulsiﬁ er that improves the

volume of the bread, makes the soft part softer and lighter

and keeps it fresh longer.

05-BBA 2605 Neu.indd 4905-BBA 2605 Neu.indd 49 04.01.2008 10:45:03 Uhr04.01.2008 10:45:03 Uhr

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Clatronic bba 2605 in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 4,83 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Clatronic bba 2605 Manual

Product: