580801
4
Zoom out
Zoom in
Previous page
1/13
Next page
4 XC6610
English
Owner’s Manual
The RCA connections are corrosion resistant for optimum performance and low signal
loss. The RCA connectors are labeled CH1, CH2, CH3, CH4, CH5, CH6.
In applications where RCA signals are not present, the speaker level output from the
head unit can be used. (High-level speaker output to RCA input adapters included).
Input Gain Controls: Allow you to match the source unit’s output voltage to
achieve maximum output from the amplifier. The amplifier can accommodate input
levels from virtually any head unit with an input range of 200mV to 6.0V.
Regarding high-level input: Please use included high-level to RCA adapters.
Bass Boost: The added boost produces rich, low bass frequencies that are usually
difficult to reproduce in the vehicle/marine audio environment. Bass boost
frequency (50Hz, 0~12dB). (CH5 & CH6 only)
Input Select [2CH/4CH/6CH]:
2CH: Use CH1/2 inputs and has output to all 6 channels
4CH: Use CH1/2 and CH3/4 inputs and has output to CH1/2 and CH3/4
NOTE: When using 4CH input, CH5/6 output will be NON-FADING.
6CH: This input mode sends each RCA input to the corresponding output.
NOTE: BASS BOOST is always on channels 5/6.
FREQ All Channels: The crossover frequencies are adjustable from 50Hz to
500Hz. Use this feature along with your speaker manufacturer’s recommended
crossover frequencies to quickly design advanced systems.
NOTE: If either of the Crossover Mode Switches is set to OFF, varying the
frequency control will have no effect.
Crossover Mode (LOW HIGH FULL): A filter is activated by sliding the filter switch
to either HIGH = High Pass or LOW = Low Pass. Each filter is fully adjustable from
50-500Hz. Use this feature along with your speaker manufacture’s recommended
crossover frequencies to design a more advanced system.
Auto Sense (ON/OFF)
OFF: (common application) When source unit remote turn-on wire available.
ON: (factory radio application) Must use included RCA input adapters.
NOTE: In this setting; do not connect anything to REM terminal.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Clarion XC6610 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Clarion XC6610 in the language / languages: English as an attachment in your email.

The manual is 1,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info