580525
17
Zoom out
Zoom in
Previous page
1/36
Next page
16
English
DUB278RMP
4. Press the
[
ADJ
]
button to return to the previous
mode.
If the reception of the current broadcast station
deteriorates,
SEARCHappears in the display
and the radio searches for the same programme
on another frequency.
REG
(
Regional programme
)
function
When the REG function is ON, the optimum re-
gional station can be received. When this func-
tion is OFF, if the regional station area switches
as you drive, a regional station for that region is
received.
The factory default setting is “OFF”.
Notes:
This function is disabled when a national station
such as BBC R2 is being received.
The REG function ON/OFF setting is valid when
the AF function is ON.
1. Press and hold the
[
ADJ
]
button for 1 second
or longer to switch to the RDS adjustment
selection display.
2. Press the
[
,
]
button to select “REG”.
3. Turn the
[
ROTARY
]
knob to select ON or
OFF”.
ON:
REGin the display lights and REG function turns
on.
OFF:
REG in the display goes off and REG function
turns off.
4. Press the
[
ADJ
]
button to return to the previous
mode.
Manually tuning a regional station
in the same network
1. This function is valid when the AF function is
ON and the REG function is OFF.
Note:
This function can be used when a regional broad-
cast of the same network is received.
2. Press any one of the
[
DIRECT
]
buttons to call
out the regional station.
3. If the reception condition of the called out sta-
tion is bad, press the
[
DIRECT
]
button of the
same number. The unit receives a local station
on the same network.
TA
(
Traffic Announcement
)
In the TA standby mode, when a traffic announce-
ment broadcast starts, the traffic announcement
broadcast is received as top priority regardless of
the Function mode so you can listen to it. Traffic
programme
(
TP
)
automatic tuning is also pos
-
sible.
This function can only be used when TPis lit in
the display. When
TPis lit, this means that the
RDS broadcast station being received has traffic
announcement programmes.
Setting the TA standby mode
If you press the
[
TA
]
button when only
TPis lit in
the display, “TP” and “TA” light in the display and
the unit is set into the TA standby mode until a
traffic announcement is broadcast. When a traffic
announcement broadcast starts, TRA INFOap-
pears in the display. If you press the
[
TA
]
button
while a traffic announcement broadcast is being
received, the traffic announcement broadcast re
-
ception is cancelled and the unit goes into the TA
standby mode.
Cancelling the TA standby mode
As “TP” and “TA” lit in the display, press the
[
TA
]
button. The TAin the display goes off and the
TA standby mode is cancelled.
If “TP” is not lit, pressing the
[
TA
]
button searches
for a TP station.
Searching for a TP station
When “TPis not lit, if you press the
[
TA
]
button,
TA in the display lights and the unit automati-
cally receives a TP station.
Note:
If a TP station is not received, the unit continues
the search operation. Pressing
[
TA
]
button again
goes off TAin the display and stops TP station
searching.
RDS Operations
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Clarion DUB278RMP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Clarion DUB278RMP in the language / languages: English as an attachment in your email.

The manual is 5,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Clarion DUB278RMP

Clarion DUB278RMP User Manual - German - 36 pages

Clarion DUB278RMP User Manual - Dutch - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info