Manual Clarion DUB278RMP (page 16 of 36) (English)

580525

Zoom out

Zoom in

1/36

English

DUB278RMP

Auto store

Auto store is a function for storing up to 6 stations

that are automatically tuned in sequentially. If 6

receivable stations cannot be received, a previ-

ously stored station remains un-overwritten at

the memory position.

1. Press the

[

BAND

]

button and select the desired

band

(

FM or AM

(

MW/LW

))

2. Press and hold the

[

]

button for 2 seconds

or longer. The stations with good reception are

stored automatically to the preset channels.

∗ If auto store is performed in the FM bands, the

stations are stored in FM3 even if FM1 or FM2

was chosen for storing stations.

Preset scan

Preset scan receives the stations stored in preset

memory in order. This function is useful when

searching for a desired station in memory.

1. Press the

[

]

button.

2. When a desired station is tuned in, press the

[

]

button again to continue receiving that

station.

Note:

Be careful not to press and hold the

[

]

button

for 2 seconds or longer, otherwise the auto store

function is engaged and the unit starts storing

stations.

Radio Operations

Recalling a preset station

A total of 24 preset positions

(

6-FM1, 6-FM2,

6-FM3, 6-AM

)

exists to store individual radio

stations in memory. Pressing the corresponding

[

DIRECT

]

button recalls the stored radio frequen

cy automatically.

1. Press the

[

BAND

]

button and select the desired

band

(

FM or AM

(

MW/LW

))

2. Press the corresponding

[

DIRECT

]

button to

recall the stored station.

∗ Press and hold one of the

[

DIRECT

]

buttons

for 2 seconds or longer to store that station into

preset memory.

RDS Operations

RDS

(

Radio Data System

)

This unit has a built-in RDS decoder system that

supports broadcast stations transmitting RDS

data.

This system can display the name of the broad-

cast station being received

(

)

and can auto

matically switch to the broadcast station with the

best reception as you move long distances

(

switching

)

Also, if a trafﬁc announcement or programme

type is broadcast from an RDS station, no matter

what mode you are in, this broadcast is received.

Additionally, if EON information is received, this

information enables automatic switching of other

preset stations on the same network and inter-

ruption of the station being received with trafﬁc

information from other stations

(

)

. This func

tion is not available in some areas.

When using the RDS function, always set the

radio to FM mode.

AF : Alternative Frequency

PS : Programme Service Name

PTY : Programme Type

EON : Enhanced Other Network

TP : Trafﬁc Programme

∗ RDS interrupt does not function during AM radio

reception.

∗ When set receives RDS signal, and can read PS

data, PS appears in the display.

AF function

The AF function switches to a different frequency

on the same network in order to maintain opti-

mum reception.

∗ The factory default setting is “ON”.

1. Press and hold the

[

ADJ

]

button for 1 second

or longer to switch to the RDS adjustment

selection display.

2. Press the

[

]

button to select “AF”.

3. Turn the

[

ROTARY

]

knob to select “ON” or

“OFF”.

ON:

“AF” in the display lights and AF function turns on.

OFF:

“AF” in the display goes off and AF function turns off.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Clarion DUB278RMP in the language / languages: English as an attachment in your email.

The manual is 5,08 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Clarion DUB278RMP

Clarion DUB278RMP User Manual - German - 36 pages

Clarion DUB278RMP User Manual - Dutch - 36 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Clarion DUB278RMP Manual

Product: