580517
14
Zoom out
Zoom in
Previous page
1/137
Next page
26 27
Notes on installation
1. Before installation, please make sure
proper connections are conducted and the
unit operates normally. Improper connec-
tion may result in damage to the unit.
2. Use only accessories designed and manu-
factured for this unit. Other unauthorized
accessories may result in damage to the
unit.
3. Before installation, please fasten all power
cables.
4. DO NOT install the unit in close to hot
areas to prevent damage to electrical
components, such as the laser head.
5. Install the unit horizontally. Installing
the unit more than 30 degrees from the
horizontal plane may result in reduced
performance.
6. To prevent electric sparks, connect the
positive pole rst and then the negative
pole.
7. DO NOT block the ventilation opening
in the unit housing since this will prevent
proper heat dissipation and may result in
damage to the unit.
Unit Installation
Method A
1. Insert the mounting bracket into the dash-
board, choose the appropriate mounting
tabs according to the gap width, and bend
the mounting tabs outwards with a screw-
driver to x the mounting bracket in place.
2. Screw in the M4 × 42 stopper in the hole
on the back of the unit and put a rubber
sheath over the screw. (see picture below)
3. Slide the unit into the bracket until you hear
a click sound.
Screwdriver
Dashboard
Screwdriver
Rubber Sheath
M4 42
Mounting Bracket
Method B
1. Insert this unit directly to the opening of the
dashboard.
2. Insert M5 × 6 cylindrical screws through
the holes in the mounting frame into the
holes of the source unit and tighten on both
sides.
Trim Ring installation
Attach the trim ring around the front panel.
6) Removing the Source Unit
Disassemble the trim ring
1. Push the trim ring upward and pull out the
upper part.
2. Push the trim ring downward and pull out
the lower part.
Disassemble the unit
1. Switch o the power.
2. Remove the panel.
3. Remove the trim ring.
4. Insert the removal keys until they lock, then
pull the unit out.
5. Disconnect all the wires.
Mounting Frame
M5 6
Dashboard
English PolskiFrançais Deutsch Italiano Nederlands Español Svenska 
English PolskiFrançais Deutsch Italiano Nederlands Español Svenska 
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Clarion CZ309E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Clarion CZ309E in the language / languages: English as an attachment in your email.

The manual is 16,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info