580517
11
Zoom out
Zoom in
Previous page
1/137
Next page
20 21
Press the [VOL/SEL] knob for more than 2
seconds to select the available EQ presets.
The rst Press shows the current EQ. Further
long pressing changes EQ presets in this
order:
USER->DSP OFF->FLAT->POP->ROCK-
>CLASSIC
Audio Setup
Press the [ADJ] button to enter the system
MENU. Turn the [VOL/SEL] knob to adjust,
then press the [ADJ] button to con rm the se-
lection and switch to the next item in menu.
TA VOL
Rotate the knob to adjust TA volume.
Clock Setting
When thee time is displayed, press [ ] to en-
ter the hour setting mode, press [ ] to enter
the minute setting mode, then turn the knob to
adjust.
ESP: 12/45
Electronic shock protection timing: 12 sec. or
45 sec. for CD/MP3.
ESP 12s: Selected as CD-ESP time 12 sec-
onds, MP3-ESP time >100 seconds.
ESP 45s: Selected as CD-ESP time 45 sec-
onds, MP3-ESP time >100 seconds.
The ESP 12 mode provides higher audio qual-
ity.
LOCAL/DX
Rotate the knob to choose the local or distant
radio reception mode.
LOCAL: Only stations with a strong signal are
received.
DX: All stations, including those with weak
signals, are received.
System Setup
BEEP ON/OFF
Turn the knob to turn the button beep sound
on or o .
STEREO/MONO
Turn the knob to choose FM stereo or mono
reception.
AUTO: ON/OFF
AUTO ON: The unit connects to the last blue-
tooth device automatically.
AUTO OFF: The unit does not connect auto-
matically.
ROLL: ON/OFF
For track information that is longer than the
display panel:
When ROLL is ON, the LCD will display
ID3 TAG information in cycles, e.g: TRACK-
>FOLDER->FILE->ALBUM->TITLE-
>ARTIST->TRACK->…
When ROLL is OFF, the LCD will display
specific ID3 TAG information. The default is
TRACK, but you can change it to another ID3
TAG by pressing DISP.
MULT ON/OFF
Multi Session on/o (Multi session o : mixed
CD, ONE session CD; Multi session on:
Mixed, Extra, multi session CD)
Press the [VOL/SEL] knob to enter the audio
setting menu and select USER presets
including:
BAS(bass)->MID(middle)->TRE(treble)-
>BAL(balance)->FAD(fader)->BASS
Q->LPF(low pass filter)->MID Q->MPF(mid
pass filter)->HPF(high pass filter), turn the
[VOL/SEL] knob to select a value, and press
to con rm.
6. TROUBLESHOOTING
English PolskiFrançais Deutsch Italiano Nederlands Español Svenska 
English PolskiFrançais Deutsch Italiano Nederlands Español Svenska 
GENERAL
Problem Cause Measure
Unit can not power on Unit fuse blown. Install new fuse with correct rating.
Car batterz fuse blown. Install new fuse with correct rating.
Unit can not power on
Nothing happens
when buttons are
pressed.
Display is not
accurate.
Illegal operation. Turn o thr power and open the operation panel.
Pres the reset button with a thin rod.
Note:
When the Reset button is pressed, turn o the
ACC powet.*
* When the Reset button is pressed, frequencias
of radio stations, titles, etc. stored in memory are
cleared.
Remote control does
not work
Battery depleted. Change the battery.
Battery installed incorrectly. Install the battery correctly.
No/low audio output
Improper audio output
connection.
Check wiring and correct.
Volume set too low. Increase volume level.
Speakers damaged. Replace speakers.
Heavily biased volume
balance.
Adjust the channel balance to center position.
Speaker wiring is in contact
with metal part of car.
Insulate all speaker wiring connections.
Poor soun quality or
distortion
Non-standard disc used. Use a standard disc.
Speake power rating does
not match unit.
Replace speakers.
Wrong connections. Check wiring and correct.
Speaker is shorted. Check wiring and correct.
Tel-Mute malfunction MUTE wire is grounded. Check the “MUTE” wiring and correct.
Unit resets itself when
engine is o
Incorrect connection
between ACC and BATT.
Check wiring and correct.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Clarion CZ309E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Clarion CZ309E in the language / languages: English as an attachment in your email.

The manual is 16,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info