580510
10
Zoom out
Zoom in
Previous page
1/17
Next page
English
10 CZ109E/CZ109ER/CZ109EG
Setting the TA standby mode
If you press the [TA] button when only
TP
appears in the display,
TP” and “TA” appear in
the display and the unit is set into the TA
standby mode until a traffic announcement is
broadcast. When a traffic announcement
broadcast starts, “TRA INFO” appears in the
display. If you press the [TA] button while a
traffic announcement broadcast is being
received, the traffic announcement broadcast
reception is cancelled and the unit goes into the
TA standby mode.
Cancelling the TA standby mode
As
TP” and “TA” appears in the display, press
the [TA] button. The “TA” in the display goes off
and the TA standby mode is cancelled.
If “TP” is not appeared, pressing the [TA] button
searches for a TP station.
Searching for a TP station
When
TP” is not appeared, if you press the [TA]
button, “TA” appears in the display and the unit
automatically receives a TP station.
Auto store function for TP stations
You can automatically store up to 6 TP stations
into preset memory. If the number of TP can be
received less than 6, broadcast stations already
stored in memory and left without being
overwritten.
As “TA” appears in the display, press and hold
the [ ] button (2 sec.). The TP stations with
the good reception sensitivity are stored into
preset memory.
Even if you select FM1 or FM2, a TP station is
stored in memory for FM3.
PTY (Programme Type)
This function enables you to listen to a
broadcast of the selected programme type even
if the unit is on a function mode other than radio.
Some countries do not yet have PTY broadcast.
In the TA standby mode, a TP station has priority
over a PTY broadcast station.
The factory default setting is “OFF”.
1. Press and hold the [DISP] button (1 sec.) to
switch to the RDS adjustment selection
display.
2. Press [x] or [v] to select “PTY”.
3. Turn the [ROTARY] knob to select “ON” or
OFF”.
•ON:
PTY” appears in the display and PTY
standby mode is enabled. When the selected
PTY broadcast starts, the PTY item name
appears in the display.
•OFF:
PTY” turns off in the display and PTY
standby mode is cancelled.
4. Press the [DISP] button to return to the
previous mode.
Cancelling a PTY interrupt broadcast
Press the [TA] button during the PTY interrupt
broadcast, the PTY interrupt is cancelled and
the unit returns to PTY standby mode.
Selecting PTY
1. Press and hold the [DISP] button (1 sec.) to
switch to the RDS adjustment selection
display.
2. Press [x] or [v] to select “PTY SEL”.
3. Press the [ ] button.
4. Press any of the [DIRECT] buttons.
Alternatively, turn the [ROTARY] knob to
select the desired PTY.
5. Press the [DISP] button to return to the
previous mode.
6 types of PTY are stored for the [DIRECT]
buttons.
The PTY select mode is cancelled
automatically 7 seconds after a PTY is
selected.
PTY seek
1. Press and hold the [DISP] button (1 sec.) to
switch to the RDS adjustment selection
display.
2. Press [x] or [v] to select “PTY SEL”.
3. Press the [ ] button.
4. Press the [v] button to search for a PTY
broadcast in the direction of higher
frequencies; press the [x] button to search
in the direction of lower frequencies.
If no station with the selected PTY broadcast
can be received, the unit returns to the PTY
select mode.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Clarion CZ109EG at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Clarion CZ109EG in the language / languages: English as an attachment in your email.

The manual is 1,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Clarion CZ109EG

Clarion CZ109EG User Manual - German - 21 pages

Clarion CZ109EG User Manual - Dutch - 19 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info