580510

Clarion CZ109EG Manual

8
Zoom out
Zoom in
Previous page
1/17
Next page
English
8 CZ109E/CZ109ER/CZ109EG
Radio Operations
Listening to broadcasts
1. Press the [SRC] button and select radio
mode.
∗ PS: Programme service name
∗ PTY: Programme type
2. Press the [BND] button and select the
reception band. Each time the button is
pressed, the band changes as follows:
F1 (FM1) ➜ F2 (FM2) ➜ F3 (FM3) ➜ AM
(MW/LW) ➜ F1 (FM1)...
Tuning
3 tuning modes are available: seek tuning,
manual tuning and preset tuning.
Seek tuning
2 seek tuning modes are available: DX SEEK
and LOCAL SEEK.
DX SEEK can automatically tune to receivable
broadcast stations; LOCAL SEEK can tune to
only broadcast stations with a good reception
sensitivity.
∗ If “MANU” is appeared in the display, press
[BND] (1 sec.).
“MANU” in the display goes off and seek tuning is
now available.
∗ If “TA” is appeared in the display, TP stations are
automatically sought.
● DX SEEK
Press [x] or [v] to automatically seek
stations.
When the [v] button is pressed, the station is
sought in the direction of higher frequencies; if
the [x] button is pressed, the station is sought
in the direction of lower frequencies.
● LOCAL SEEK
If [x] or [v] is pressed and held in position
(1 sec.), local seek tuning will be enabled.
Broadcast stations with good reception
sensitivity are selected.
Manual tuning
2 modes are available: Quick tuning and step
tuning.
● Quick tuning
Press and hold [x] or [v] (1 sec.) to tune a
station.
● Step tuning
Press [x] or [v] to manually tune a station.
∗ If no operation is performed for 7 seconds or
more, manual tuning is cancelled and the display
returns to the previous mode.
Recalling a preset station
A total of 24 preset positions (6-FM1, 6-FM2, 6-
FM3, 6-AM) can be used to store broadcast
stations in memory. Press the corresponding
[DIRECT] button to automatically recall the
stored frequency.
Manual memory
1. Use seek tuning or manual tuning to select
the desired station.
2. Press and hold one of the [DIRECT] buttons
(2 sec.) to store the current station in preset
memory.
Auto store
The auto store function stores up to 6 stations
automatically tuned in sequential order. If 6
stations cannot be found, any previously stored
station remains in its memory position.
1. Press the [BND] button and select the
desired band (FM/AM (MW/LW)).
2. Press and hold the [ ] button (2 sec.). The
stations with good reception are stored
automatically to the preset channels.
∗ If auto store is performed in the FM bands, the
stations are stored in FM3 even if FM1 or FM2
was chosen for storing stations.
Preset scan
Preset scan sequentially receives stations
stored in preset memory. This function is useful
when searching for a station stored in the
memory.
1. Press the [ ] button.
2. When the desired station is received, press
the [ ] button again to continue receiving
that station.
Note:
• Do not press and hold the [ ] button (2 sec.),
or the auto store function will begin and the unit
will begin storing stations.
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Clarion CZ109EG at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Clarion CZ109EG in the language / languages: English as an attachment in your email.

The manual is 1,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Clarion CZ109EG

Clarion CZ109EG User Manual - German - 21 pages

Clarion CZ109EG User Manual - Dutch - 19 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info