Manual Clarion CMD8 (page 9 of 19) (English)

580502

Zoom out

Zoom in

1/19

English

CMD8

Select tuner as playing source

Press [AM/FM] button once or more to enter

RADIO mode.

Changing the reception area

This unit is initially set to USA frequency

intervals of 10 kHz for AM and 200 kHz for

FM. When using it outside the USA, the

frequency reception range can be switched

to the intervals below.

U.S.

standard

Other

countries

Europe

standard

Frequency

spacing

10 kHz 9 kHz 9 kHz

Frequency

range

530 to 1,710

kHz

531 to

1,629kHz

531 to 1,602

kHz

Frequency

spacing

200kHz 50kHz 50kHz

Frequency

range

87.9 to

107.9MHz

87.5 to 108

MHz

87.5 to 108

MHz

Setting the reception area

* All station preset memories are lost when

the reception area is changed.

1. Press the [AM/FM] button and select the

desired radio band (FM or AM).

2. Press the [OPTION] button.

3. Press the [ ] or [ ] button to select “TUN

AREA”.

4. Rotate the [UP/DOWN] knob to select:

• U: U.S. standard (initial setting)

• K: Other countries

• E: Europe standard

5. Press and hold the [ENTER] button to

store the selecting.

• The unit will turn off after setting.

Selecting the radio band

Press the [AM/FM] button on the front panel

or the [BAND / TOP] on the remote control

to select one radio band among FM1, FM2,

FM3, AM.

Manual tuning

During manual tuning, the frequency will be

changed in steps.

Press the [ ] or [ ] button on the panel to

tune in a lower / higher station.

Radio Operations Radio Operations

Press the [ ] or [ ] button on the remote

control to select preset stations.

Auto tuning

Press and hold the [ / ] button on the

panel or [ / ] button on the remote

control to seek a lower / higher station.

To stop searching, repeat the operation above

or press other buttons having radio functions.

Note:

When a station is received, searching stops

and the station is played.

Preset scan

Preset scan receives the stations stored

in preset memory in order. This function is

useful when searching for a desired station

in memory.

1. Press the [OPTION] button.

2. Press the [

] or [ ] button to select

“PRESET SCN”.

3. Press the [ENTER] button.

* When a desired station is tuned in,

press the [ENTER] button to continue

receiving that station.

Auto store

Only stations with sufcient signal strength

will be detected and stored in the memory.

1. Press the [AM/FM] button and select the

desired band (FM or AM).

2. Press the [OPTION] button.

3. Press the [ ] or [ ] button to select

“AUTO STORE”.

4. Press and hold the [ENTER] button (1

sec.) to start automatic station search.

To stop auto store, press other buttons

having radio functions.

Notes:

1. After auto store, the previous stored stations

will be overwritten.

2. The unit has 4 bands, such as FM1, FM2,

FM3 and AM. FM3 and AM can store by AS

function. Each band can store 6 stations,

M303 can store 24 stations in total.

Manual store

1. Select the desired station with seek

tuning or manual tuning.

2. Press the [MENU] button

3. Rotate the [UP/DOWN] knob to select a

desired station.

4. Press and hold the [ENTER] button

to store the current station into preset

memory.

Recall the stored stations

A total of 24 preset positions (6-FM1, 6-FM2,

6-FM3, 6-AM) exists to store individual radio

stations in memory.

1. Press the [AM/FM] button and select the

radio band.

2. Press the [MENU] button.

3. Rotate the [UP/DOWN] knob to select the

desired preset station.

4. Press the [ENTER] button to recall the

stored frequency.

SiriusXM Satallite Radio Operations

Everything worth listening to is on SiriusXM,

getting over 130 channels, including the

most commercial-free music, plus the best

sports, news, talk and entertainment. To

start listening to the SiriusXM™ Satellite

Radio, a SiriusXM Vehicle Tuner (purchased

separately) and Subscription are required.

Displaying the Radio ID

Before you listen to satellite radio, you must

subscribe to the service using the SiriusXM

Radio ID number.

1. Press [ SAT ] button to activate SiriusXM-

mode.

2. Press the [

/ ] button on the front panel

or the marine wired remote control to select

channel “0”.

The unit displays Radio ID.

Notes:

1. The Radio ID is located on the bottom of

the SiriusXM Connect Vehicle Tuner.

2. Please note that the SiriusXM Radio ID

does not include the letters I, O, S or F.

3. Activate the SiriusXM Connect Vehicle

Tuner using one of the two methods

below:

• Online: Go to “www.siriusxm.com/

activatenow”.

• Phone: Call 1-866-635-2349.

• To activate SiriusXM Canada service

go to www.xmradio.ca and click on

“ACTIVATE RADIO” in the top right

corner, or call 1-877-438-9677

Storing Channel Presets

1. Press [SAT] button on the front panel or

the [BAND / TOP] on the remote control or

the [MENU / BAND] on the marine wired

remote control to select the desired band

you want to store the preset in.

There are 3 Satellite Radio Preset bands.

Each press of [SAT] or [BAND / TOP] or

Note:

Afterthebandselecting,youcanalsorotate

the [UP/DOWN] knob to select adesired

presetstation.

Local seeking

When LOCAL seeking is ON, only those radio

stations with strong radio signal could be received.

To select LOCAL function, press the

[ADJUST] button on the front panel or press

and hold the [ DISP ] button on the remote

control, then press [ ] button on the front

panel or [ ] button on the remote control

repeatedly until DX / LO displays on the

screen, and rotate the [UP/DOWN] knob to

select Local or Distant mode.

Note:

The number of radio stations that can be

received will decrease after the local seeking

mode is ON.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Clarion CMD8 in the language / languages: English as an attachment in your email.

The manual is 1,82 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Clarion CMD8 Manual

Product: