580502
8
Zoom out
Zoom in
Previous page
1/19
Next page
English
8
CMD8
System Setup
SCRN SVR: ON/OFF
Rotate the [UP/DOWN] knob to choose
SCRN SVR (screen saver) ON or OFF.
SCROLL: ON/OFF
For track information that is longer than the
display panel:
When SCOLL is ON, the LCD will scroll the
ID3 TAG information across the display, e.g.:
TRACK->FOLDER->FILE->ALBUM->TITLE-
>ARTIST->TRACK->...
When SCROLL is OFF, the LCD will display
one of the ID3 TAG information, the default
is TRACK, but user can adjust it to other
ID3 TAG information by pressing [DISPLAY]
button.
REAR/S-W
Rotate the [UP/DOWN] knob to choose
REAR or S-WOOFER (SUB-WOOFER).
SW PHASE
Rotate the [UP/DOWN] knob to choose
S UBW O OFE R p has e R E VERS E o r
NORMAL.
Pandora: ON/OFF
Select OFF if the Pandora application has
not been installed on your iPod touch or
iPhone.
DIMMER: ON/OFF
Rotate the [UP/DOWN] knob to choose
DIMMER ON or OFF.
ON: LCD dimmer is active when small
light of vehicle is turned ON.
OFF: LCD always maximum brightness
regardless of the vehicle small light.
CONTRAST
You can adjust the display contrast to match
the angle of installation of the unit.
* The factory default setting is “9”.
(Adjustment level: 1 to 10)
Rotate the [UP/DOWN] knob to adjust the
contrast.
To change adjustment setting
1. Press the [ADJUST] button to switch to
the adjustment selection display.
2. Press the [ ] or [ ] button to select the
item name”.
CLOCK, DX/LO, SCRN SVR, SCROLL,
REAR/S-W, SW PHASE, Pan do ra ,
DIMMER, CONTRAST, BEEP, 12/24H,
RESET
3. Rotate the [UP/DOWN] knob to select the
desired setting value”.
* In the case of display blinking “ENT”, you
can press the [ENTER] button to adjust
the setting value.
4. After completing settings, press the
[ADJUST] or [RETURN] button to return to
the previous mode.
CLOCK
1. Press the [ENTER] button.
2. Press the [
] or [ ] button to select the
hour or the minute.
3. Rotate the [UP/DOWN] knob to set the
correct time.
* The clock is displayed in 12-hour format
by default.
4. Press the [ENTER] button to store the time
into memory.
Note:
• You cannot s et th e c lo ckwhenitis
displayedwith onlytheignition on. Ifyou
drainor removetheboat’sbatteryor take
out this unit, theclock is reset.While
setting the clock, ifanother button or
operationis selected, theclocksetmode
iscanceled.
DX/LO (RADIO mode)
Rotate the [UP/DOWN] knob to choose radio
local or distant at RADIO mode.
LO: Only stations with strong signal can
be received.
DX: Stations with strong and weak signals
can be received.
System Setup
Press the [AUDIO] button to enter sound effect
setting mode. First press shows current BEAT
EQ setting. Rotate the [UP/DOWN] knob to
changes BEAT EQ in this order:
OFF -> B-BOOST -> IMPACT -> EXCITE ->
CUSTOM
Rotate the [UP/DOWN] knob to changes
CUSTOM, and press the [ENTER] button, the
press [ ] or [ ] button to select it including:
BASS-G -> BASS-F -> BASS-Q -> MID-G ->
MID-F -> MID-Q -> TREBLE-G -> TREBLE-F
-> TREBLE-Q, rotate the [UP/DOWN] knob to
select a value.
BASS-G / MID-G / TREBLE-G: (-7)- (+7)
BASS-F: 50 / 100 / 200
BASS-Q: 0.7 / 1.0 / 1.4 / 2.0
MID-F: 500 /1K / 2K
MID-Q: 0.7 / 1.0 / 1.4 / 2.0
TREBLE-F: 5k / 10k / 15k
TREBLE-Q: 0.7 / 1.0 / 1.4 / 2.0
Audio Setup
Press the [AUDIO] button, then press [ ] or
[ ] button to select USER preset including:
BALANCE -> FADER -> M-B EX -> HPF
(high pass lter) -> LPF (low pass lter) ->
SUBW VOL (Subwoofer Volume), rotate the
[UP/DOWN] knob to select a value.
BALANCE: LEFT 1-7 -> CENTER -> RIGHT
1-7
FADER: FRONT 1-7 -> CENTER -> REAR
1-7
M-BEX: ON / OFF
HPF: THROUGH / 60 / 90 / 120
LPF: THROUGH / 60 / 90 / 120
SUBW VOL: (-6) - (+6)
BEEP: ON/OFF
Rotate the [UP/DOWN] knob to choose button
beep sound ON or OFF.
12/24H
Rotate the [UP/DOWN] knob to choose time
format: 12 HOURS or 24 HOURS.
RESET
Long press [ ENTER ] button. Settings will
be set to the default value.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Clarion CMD8 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Clarion CMD8 in the language / languages: English as an attachment in your email.

The manual is 1,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info