580427
24
Zoom out
Zoom in
Previous page
1/38
Next page
Operations Common to Each Mode
English
24 CMD6
•LEFT: Telephone calls can be heard on
the front left speaker connected to this
unit.
Cell phone interrupt setting
If you connect this unit and your cell phone with
an optional cable, you can listen to your calls on
your speakers.
When the rear AUX1 input terminals is used to
connect an AUX BLUETOOTH BB (BLT370)
(sold separately):
The factory default setting is “OFF”.
2-1. Select “TEL-SW”.
3-1. Turn the [UP/DOWN] knob to select
setting. When turning the [UP/DOWN]
knob, the setting changes as follows:
OFFONMUTE
•OFF: This unit continues normal
operation even when the cell phone is
used.
•ON: Telephone calls can be heard from
the speakers connected to the unit.
When listening to calls on your speakers,
turn the [VOLUME] knob to adjust the
volume.
•MUTE: The sound from this unit is muted
during telephone calls.
Note:
• If connecting a hands-free kit, make sure the
setting is ON to receive telephone audio through
the system.
Performing memory reset
This function allows you to reset adjusted
settings in the ROM.
The stored settings like preset channels,
password adjusted areas, adjust mode settings
and audio mode settings can be formatted by
this function.
Note:
• The settings will remain in the ROM even if you
turn the power off or press the reset button.
2-1. Select “RESET”.
3-1. Press and hold the [ENTER] button.
This unit will be restarted automatically.
Performing a system check
This function allows you to perform a system
check from the adjust mode when required.
2-1. Select “SYSTEM CHECK”.
3-1. Press and hold the [ENTER] button
(1 sec.).
SYSTEM CHECK” appears in the display,
then the unit returns to the previous
operation mode.
AUX function
The rear AUX terminals of this system is
provided to allow playback of sounds and music
from external devices connected to this unit.
Selecting AUX mode
1. Press the [AUX/iPod] button to select
AUX 1” or “AUX 2”.
Selecting AUX IN sensitivity
Make the following settings to select the
sensitivity when sounds from external devices
connected to this unit are difficult to hear even
after adjusting the volume.
The factory default setting isMID”.
1. Press the [OPTION] button.
2. AUX SENS” appears in the display.
3. Turn the [UP/DOWN] knob to select “HIGH”,
MID” or “LOW”.
Note:
• When AUX mode is selected, AUX IN sensitivity
can be set.
CMD6_ENG.book Page 24 Friday, February 20, 2009 10:51 AM
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Clarion CMD6 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Clarion CMD6 in the language / languages: English as an attachment in your email.

The manual is 2,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Clarion CMD6

Clarion CMD6 User Manual - German - 34 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info