580427

Clarion CMD6 Manual

23
Zoom out
Zoom in
Previous page
1/38
Next page
English
23 CMD6
Operations Common to Each Mode
● Setting the clock
2-1. Select “CLOCK”.
3-1. Press the [ENTER] button.
3-2. Press the [X] or [V] button to select the
hour or the minute.
3-3. Turn the [UP/DOWN] knob to set the
correct time.
∗ The clock is displayed in 12-hour format.
3-4. Press the [ENTER] button to store the time
into memory.
Note:
• You cannot set the clock when it is displayed
with only the ignition on. If you drain or remove
the boat’s battery or take out this unit, the clock is
reset. While setting the clock, if another button or
operation is selected, the clock set mode is
canceled.
● Setting the contrast
You can adjust the display contrast to match the
angle of installation of the unit.
∗ The factory default setting is “9”.
(Adjustment level: 1 to 10)
2-1. Select “CONTRAST”.
3-1. Turn the [UP/DOWN] knob to adjust the
contrast.
● Displaying the settings
The number of indicator of this unit decreases,
you can see the state of current settings at any
operation mode.
2-1. Select “SETTINGS”.
3-1. Turn the [UP/DOWN] knob to display the
state of current settings.
∗ When the setting is selected, after 1 second
the current state will be displayed.
● Setting the method for title scroll
Set how to scroll in CD-TEXT, MP3/WMA/AAC
title.
∗ The factory default setting is “ON”.
2-1. Select “SCROLL”.
3-1. Turn the [UP/DOWN] knob to select “ON”
or “OFF”.
•ON:
To scroll automatically.
• OFF:
To scroll just 1 time.
∗ When you want to see the title again, in the
title mode, press and hold the [DISPLAY]
button for 3 seconds or longer to scroll the
title.
● Setting the dimmer control
You can set the dimmer control “ON” or “OFF”.
∗ The factory default setting is “ON”.
2-1. Select “DIMMER”.
3-1. Turn the [UP/DOWN] knob to select “ON”
or “OFF”.
● Setting the speaker output for cell
phones
When the rear AUX1 input terminals is used to
connect an AUX BLUETOOTH BB (BLT370)
(sold separately):
∗ The factory default setting is “RIGHT”.
∗ To output the telephone calls, set cell phone
interrupt to “ON”.
2-1. Select “TEL-SP”.
3-1. Turn the [UP/DOWN] knob to select
“RIGHT” or “LEFT”.
•RIGHT: Telephone calls can be heard on
the front right speaker connected to this
unit.
To change adjustment setting
1. Press the [ADJUST] button to switch to
the adjustment selection display.
2. Press the [X] or [V] button to select the
“item name”.
“CLOCK” ↔ “CONTRAST” ↔
“SETTINGS” ↔ “SCROLL” ↔
“DIMMER” ↔ “TEL-SP” ↔ “TEL-SW” ↔
“RESET” ↔ “SYSTEM CHECK”
3. Turn the [UP/DOWN] knob to select the
“desired setting value”.
∗ In the case of display blinking “ENT”, you
can press the [ ] button to adjust the
setting value.
4. After completing settings, press the
[ADJUST] or [RETURN] button to return to
the previous mode.
For example: after 1 second,
CMD6_ENG.book Page 23 Friday, February 20, 2009 10:51 AM
… 23 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Clarion CMD6 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Clarion CMD6 in the language / languages: English as an attachment in your email.

The manual is 2,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Clarion CMD6

Clarion CMD6 User Manual - German - 34 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info