473648
9
Zoom out
Zoom in
Previous page
1/15
Next page
CJ-981E 11
English
3-1. Press the [SELECT] (z) button to choose
either ON or OFF.
ON: camera display is automatically linked
to the circuit operation.
OFF: camera display is not automatically
linked to the circuit operation.
°
Hazard Switch Linked Switching
CAMERA2 Hazard-Switch Linked Display
(CAM2 HAZARD)
When the power supply boxs CAMERA2 link
wire has been wired to the vehicles left-turn
signal wire, this setting determines whether
the CAMERA2 image signal is automatically
displayed when the vehicles hazard switch is
activated.
CAMERA3 Hazard-Switch Linked Display
(CAM3 HAZARD)
When the power supply boxs CAMERA3 link
wire has been wired to the vehicles left-turn
signal wire, this setting determines whether
the CAMERA3 image signal is automatically
displayed when the vehicles hazard switch is
activated.
3-1. Press the [SELECT] (z) button to choose
either ON or OFF.
ON: camera display is not automatically
linked to the circuit operation.
OFF: camera display is automatically
linked to the circuit operation.
Note:
If the CAMERA2 and CAMERA3 link wires are
wired to a circuit other than the turn-signal, set
both CAM2 HAZARD and CAM3 HAZARD to
OFF.
4. Press the [MODE] button to return to the
CAM mode screen.
Enlarging the CCD Cameras
Image (ZOOM Function)
This function operates only when a zoom-
equipped CCD camera is connected, and when
the CAM TYPE setting has been used to
select a zoom-equipped camera.
1. Press the [ZOOM] button.
The CCD cameras image is enlarged by a
ratio of 1.4x. During operation of the zoom
function the word ZOOM will appear in the
upper left corner of the screen.
2. To return to the normally sized image, press
the [ZOOM] button once again.
Backlight Compensation
Function (IRIS)
Under conditions of backlight, it may become
difficult to visually confirm on screen the position
of the bumper or people and objects in the
vicinity of the vehicle. In such cases, this
function automatically adjusts the size of the
CCD cameras aperture (iris) to allow for easier
viewing conditions.
1. Press the [IRIS] (w) button.
The CCD cameras aperture is automatically
adjusted to produce a brighter image.
2. To return to the normal aperture, press the
[IRIS] (w) button once again.
Notes:
When the backlight compensation function
operates, the entire monitor screen will become
brighter, with the result that bright areas
recognizable under normal conditions may
become excessively washed out and more
difficult to see.
Do not use the backlight compensation function
except for temporarily improving visibility of dark
areas of the screen.
The backlight compensation function operates
when the connected CCD camera is
manufactured by Clarion.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Clarion CJ-981E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Clarion CJ-981E in the language / languages: English as an attachment in your email.

The manual is 0,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info