473648
8
Zoom out
Zoom in
Previous page
1/15
Next page
10 CJ-981E
English
Setting the Screen Saver
TIMER Function
In order to avoid forgetting to turn off the screen
in CAM mode, a timer function can be set to
automatically turn off the image after a set time.
Default value is 5M (five minutes).
1. Press the [FUNC] button and switch to the
CAM mode.
2. Press the [MODE] button to display the
TIMER setting menu.
Each time the [MODE] button is pressed the
menu switches alternately in the order
CAM MARKER TIMER
CAM.
3. Use the [z] and [w] buttons to move the
cursor and highlight the desired timer value.
TIMER
OFF
1M
2M
3M
4M
5M
4. Press the [MODE] button to return to the
CAM mode screen.
After setting the timer, a numeral will
appear in the upper right corner of the
CAM mode screen to indicate the
number of minutes until the screen turns
off (5 4 3 2 1). Also, when the
countdown time reaches ten seconds, the
remaining time numeral 1 will flash.
Notes:
The automatic screen saver timer OFF does not
operate under the following conditions:
When the transmission is placed in reverse gear
so that the rear-view camera image is displayed.
When a video (VTR) image is being viewed from
the video input connector.
When menu screens are displayed. (After one of
the above operations is performed, the CAM
mode timer is reset, and restarts from the newly
reset time.)
Setting the Camera Linked-
Image Switch (CAM AUTO/
CAM HAZARD)
°Automatic linked display
This setting is used to select whether the
camera image is automatically displayed when
the vehicles transmission is switched into
reverse gear or linked to the turn signal
circuit.
Default setting is ON (linked display).
°Hazard switch linked display
This setting is used to select whether the
camera image linked to the turn signal circuit
automatically appears when the vehicles
hazard switch is engaged.
Default setting is ON (no linked display).
1. Press the [FUNC] button to switch to the
CAM mode screen.
2. Press the [MODE] button to switch to the
CAM1 AUTO menu.
Each time the [MODE] button is pressed the
menu switches alternately in the order
CAM MARKER CAM1 AUTO
CAM2 AUTO CAM3 AUTO CAM2
HAZARD CAM3 HAZARD CAM.
CAM1
AUTO
ON
OFF
°
Automatic linked display setting
Linked switching with reverse gear (CAM1
AUTO)
This setting determines whether the
CAMERA1 image signal is automatically
displayed whenever the transmission is
shifted into reverse (when the power supply
boxs CAMERA1 link wire has been wired to
the reverse gear signal).
Turn-signal linked display (CAM2 AUTO/
CAM3 AUTO)
This setting determines whether the
CAMERA2 or CAMERA3 image signal is
automatically displayed when the turn signals
are used (when the power supply boxs
CAMERA2 or CAMERA3 link wire has been
wired to the turn signal circuit)
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Clarion CJ-981E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Clarion CJ-981E in the language / languages: English as an attachment in your email.

The manual is 0,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info