519303
13
Zoom out
Zoom in
Previous page
1/32
Next page
DCX 18..27
10 Erstinbetriebnahme Initial operation
1. Vor dem elektrischen Anschluss das
Leitungsnetz und das Gerät durch
mehrfaches,langsamesÖffnenund
Schließen des Warmwasser-Zapfven tiles
mit Wasser füllen und so voll stän dig
entlüften.NachjederEntleerung(z.B.
nach Arbeiten in der Wasser installation,
wegen Frost gefahr oder nach
Reparaturen am Gerät) muss das Gerät
vor der Wieder inbetriebnahme erneut
entlüftet werden.
Hinweis »Leistungsumschaltung«
(siehe folgende Seite, darf nur durch
autorisierten Fach mann erfolgen, sonst
erlischt die Ga rantie). Bei der ersten
Installation des Gerätes kann die maxi-
male Geräteleistung ein ge stellt werden.
Die maximal mögliche Leis tung
ist abhängig von der Instal la tions-
umgebung. Beachten Sie unbe dingt
die Angaben in der Tabelle mit den
technischen Daten, ins beson dere den
notwendigen Quer schnitt der elek-
trischen Anschluss leitung und die
Absicherung.
Beachten Sie zusätzlich die Vorgaben
derDINVDE0100.
2. Schalten Sie die Stromzufuhr zum
Gerät ein.
3.ÖffnenSiedasWarmwasserzapfventil.
Überprüfen Sie die Funktion des
Durchlauferhitzers.
4. Machen Sie den Benutzer mit dem
Gebrauch vertraut und übergeben Sie
ihm die Gebrauchsanleitung.
5. Registrieren Sie Ihr Gerät online auf
unserer Homepage www.clage.de oder
füllen Sie die Registrierkarte aus und
senden diese an den Zentralkunden-
dienst.
1. Before making the electrical connec-
tion, fill the mains and the appliance
with water by carefully opening and
closing the hot water tap in order to
vent completely.
After every draining (e.g. after work
on the plumbing sys tem or following
repairs to the appli ance), the heater
must be re-vented in this way before
starting it up again.
Note “Selection of power rating“
(only by authorised specialist, other wise
lapse of guarantee). Upon installation
of the appliance the maximum power
rating can be selected .
The maximum allowable power rating
at installation site de pends on the local
situation. It is impe rative to observe
all data shown in the table „Technical
specifications“, in particular the
required cable size and fuse protection
for the electrical connec tion.
Moreover, the electrical installation
must comply with the statutory
regulations of the respective country
and those of the local elec tricity supply
company(Germany:DINVDE0100).
2. Switch on the power supply to the
appliance.
3. Open the hot water tap.
Check the function of the appliance.
4. Explain the user how the instant-
aneous water heater works and hand
over the operating instructions.
5. Use the online registration on our
website www.clage.com or fill in the
guarantee registration card and send it
to the CLAGE Central Customer Service.
13
®
18 kW
21 kW
24 kW
27 kW
18 kW
21 kW
24 kW
27 kW
DCX-MA-07-2007a.indd 13 20.07.2007 11:01:13 Uhr
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Clage DCX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Clage DCX in the language / languages: English, German as an attachment in your email.

The manual is 3,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info