519302
13
Zoom out
Zoom in
Previous page
1/20
Next page
DBX 18..27
10 Erstinbetriebnahme Initial operation
1. Vor dem elektrischen Anschluss das
Leitungsnetz und das Gerät durch
mehrfaches,langsamesÖffnenund
Schließen des Warmwasser-Zapfven-
tiles mit Wasser füllen und so voll stän-
dig entlüften.
NachjederEntleerung(z.B.nach
Arbeiten in der Wasserinstallation,
wegen Frost gefahr oder nach
Reparaturen am Gerät) muss das Gerät
vor der Wieder inbetriebnahme erneut
entlüftet werden.
2. Schalten Sie die Stromzufuhr zum
Gerät ein.
3.ÖffnenSiedasWarmwasserzapfventil.
Überprüfen Sie die Funktion des
Durchlauferhitzers.
4. Machen Sie den Benutzer mit dem
Gebrauch vertraut und übergeben Sie
ihm die Gebrauchsanleitung.
5. Registrieren Sie Ihr Gerät online auf
unserer Homepage www.clage.de oder
füllen Sie die Registrierkarte aus und
senden diese an den Zentralkunden-
dienst.
Hinweis:Voreingestellte
Auslauftemperatur ändern
Die Warmwasserauslauftemperatur
ist werkseitig auf 50°C voreingestellt.
Durch drehen mit einem kleinen
Schlitzschraubendreher (Klingenbreite
ca. 2 mm) am Verstellpotentiometer
kann diese Voreinstellung zwischen zwei
Anschlägen im Bereich von ca. 30°C bis
60 °C verändert werden.
Die eingestellte Warmwasser auslauf-
tempe ratur wird durch Drehung im
Uhrzeigersinn verringert und durch
Drehung gegen den Uhrzeigersinn erhöht.
1. Before making the electrical connection,
fill the mains and the appliance with
water by carefully opening and closing
the hot water tap in order to vent
completely.
After every draining (e.g. after work
on the plumbing system or following
repairs to the appliance), the heater
must be re-vented in this way before
starting it up again.
2. Switch on the power supply to the
appliance.
3. Open the hot water tap.
Check the function of the appliance.
4. Explain the user how the instant-
aneous water heater works and hand
over the operating instructions.
5. Use the online registration on our
website www.clage.com or fill in the
guarantee registration card and send it
to the CLAGE Central Customer Service.
Note: Modification of factory
preset outlet temperature
The factory set hot water outlet
temperature is 50 °C.
This factory setting can be modified
within the range of approx. 30 °C to
60 °C by turning the readout potentio-
meter with a slotted screwdriver (width
approx. 2 mm).
The hot water outlet temperature will
be decreased by clockwise rotation and
increased by counterclockwise rotation.
13
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Clage DBX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Clage DBX in the language / languages: English, German as an attachment in your email.

The manual is 1,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info