34402

Citronic PD-1s mk2 Manual

6
Zoom out
Zoom in
Previous page
1/10
Next page
Citronic Limited User manual
Page 6 of 10
Scratch Mixing Tip
Operation
The following instructions assume that the counter
balance weight has been set.
1. Rotate the power switch to turn on the power, the
speed indicator and the strobe-illuminator will
light up.
2. Place a record on the slip mat, when playing a
45rpm record with a large center hole; place the
45-rpm adaptor on the center spindle.
3. Set the speed to match the record.
4. Remove the stylus protector, release the arm
clamp.
5. Set the cueing lever to the up position.
6. Press the Start/Stop button, the turntable platter
will start to rotate.
7. Move the tonearm over the desired groove.
8. Set the cueing lever to the down position, the
tonearm will descend slowly onto the record and
play begins.
9. When play is finished, raise the cueing lever,
move the tonearm to the arm rest, secure the
tonearm with the arm clamp.
10. Press the Start/Stop button to stop the platter
rotating, push the power button to turn off the
power.
Suspend play
Set the cueing lever to "UP" position during play,
the stylus tip of the cartridge will be lifted from
the record.
Target light
This unit is provided with a target light for
illuminating the stylus tip during play. Push the
target light button, the target light will be raised
into position for illuminating the stylus tip.
Remote Start
The remote start jack socket is located at the rear of
the deck. When a jack plug is inserted and connected
to a compatible mixer e.g. Station 9, CDM8:4. The
deck will be able to be started automatically from the
mixer remote start control.
Changing the Speed
As long as the pitch control (13) is in center click
position, the turntable is operated with quartz-
controlled speed.
The Blue LED (12) will then be lit.
The speed can be increased or decreased by 10% via
the pitch control (13). The Blue LED (12) will then be
off.
The Trim control (15) can be used to provide an
increased range of pitch control adjustment in order to
have the turntable rotate extremely slow or fast.
For DJ Mixer operation, the start/stop function can be
remotely controlled by a separate switch. Use the
jack remote socket (9) to connect this to the mixer
option.
Maintenance
lClean the stylus periodically with a soft brush to
prevent the accumulation of dust.
lWhen the sound becomes distorted or noisy, check
the stylus. If worn out, replace it with a new one.
lFrom time to time, the dust cover and turntable
cabinet should be wiped with a soft, dry cloth.
If you are using the deck for scratching the cartridge can be adjusted to give better traction as follows:
Align the cartridge in a direct line to the back of the tone arm.
NOTE this is not advisable to use during normal play.
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Citronic PD-1s mk2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Citronic PD-1s mk2 in the language / languages: English as an attachment in your email.

The manual is 0,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info