34402

Citronic PD-1s mk2 Manual

5
Zoom out
Zoom in
Previous page
1/10
Next page
Citronic Limited User manual
Page 5 of 10
Check List
lCheck that the following parts are included in the
package with the main unit:
1) Turntable platter
2) Slip mat
3) Dust cover
4) 45-rpm adapter
5) Counterweight
6) Operating instructions
7) Phono lead
Assembly Instructions
1. Remove the main unit with the packing from the
box and take off the packing.
2. Insert the 45-rpm adaptor in the slot on the
turntable.
3. Place the turntable platter onto the center
spindle.
4. Place the slip mat on the platter.
5. Installation of cartridge:
When installing a cartridge, refer to the operating
instructions of that cartridge.
During installation, attach the stylus protector to
guard the stylus tip from damage.
6. Insert the headshell into the front end of the
tonearm, then turn the lock nut clockwise with the
headshell firmly held horizontally.
7. Slide counterweight onto tonearm.
Twist it lightly and it will screw onto the rear shaft
of the tonearm.
8. Adjustment of horizontal zero (0) balance and
stylus pressure:
(a) Remove the stylus protector, do not touch
the stylus tip during the adjustment.
(b) Set the cueing lever to the lower position.
(c) Release the arm clamp and lift the tonearm
from the arm rest to free it.
(d) While holding the Headshell lever rotate the
counterweight until the tonearm is approximately
balanced horizontally (floats freely).
(e) Refasten the tonearm with the arm clamp.
(f) Hold the counterweight stationary with one
hand and rotate only the stylus-pressure ring to
bring the number "0" of the ring into alignment
with the center line on the tonearm rear shaft.
(g) Rotate the counterweight clockwise until the
scale shows the value corresponding to the
pressure of the used stylus, typically 4 grams.
9. Set the anti-skating control knob to the same
value as the stylus pressure.
10. Install the dust cover to the main unit.
Placement
lDo not place the unit in a location where it will be
exposed to direct sunlight or near a heating
appliance.
lDo not place the unit in a location where there is
high humidity or a lot of dust.
lCartridge may pick up sound pressures or vibrations
from the speakers coming along the floor or through
the air resulting in howling. Find a location, which is
very stable, and vibration free.
lThe legs have functions for adjusting the height of
the unit itself. Adjust the legs to stabilize the main
body horizontally.
Connections
1. Connect the power cord to the household AC
outlet.
2. Connect the unit output terminals to the PHONO
inputs of your mixer.
Output terminals Mixer input
L White) >> L Channel
R (Red) >> R Channel
GND (Spade) >> GND
NOTE: Be sure to connect the separate ground
terminal firmly to the Mixer.
If this connection is not made or is loose, a
power source "HUM" will result.
… 5 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Citronic PD-1s mk2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Citronic PD-1s mk2 in the language / languages: English as an attachment in your email.

The manual is 0,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info