Manual Citronic MPCD-X1 (page 5 of 12) (English)

455888

Zoom out

Zoom in

1/12

4. OUT BUTTON - This button is used to set the ending point of a LOOP. A LOOP is started

by pressing the IN button to select the starting point and the OUT button to set the LOOP

ending point. The LOOP will continue to play until the OUT button is pressed once again.

5. RELOOP BUTTON - If a SEAMLESS LOOP has been made, but the CD player is not

actively in SEAMLESS LOOP mode.

a. Pressing the RELOOP button will instantly reactivate the seamless loop mode. To

exit loop, press the OUT BUTTON. LOOP will appear in the LCD display when the

RELOOP function is available.

b. You can fine tune the SEAMLESS LOOP by holding the RELOOP button and using

the jog wheel to set the exact OUT point.

6. CUE BUTTON – Can be used in a number of ways:

a. Pressing the CUE button during playback immediately stops the current track and

returns the music to the last set cue point.

b. In pause mode pressing and holding the CUE button plays the track from the last

set CUE point. Releasing CUE button will return the track to the last set CUE point.

c. Pressing and holding the Cue will start the track. If PLAY/PAUSE button is pressed

during this time the track will continue to play when CUE button is released.

7. PLAY/PAUSE BUTTON – Pressing the PLAY/PAUSE button once will instantly start the

track. Pressing this button again will PAUSE the current track.

8. EJECT BUTTON – This button will EJECT the current CD (Note: The EJECT function will

only work when the unit is in CUE or PAUSE mode to prevent accidentally ejecting the

disc when in PLAY mode).

9. DISC TRAY – Use the EJECT BUTTON to open the disc tray. Load the CD into the tray

and press the EJECT BUTTON to load the draw. If the tray is not closed after 60 seconds

it will close automatically to prevent damage.

10. PITCH BEND BUTTONS - The desired pitch of the music increases when button “+” is

held and decreases when button “-” is held. The music returns to the original pitch when

either button is released.

11. PITCH SLIDER - This slider is used to adjust the playback pitch percentage. Move the

slider down to speed up the music and move the slider up to slow the music down.

12. PITCH ON/OFF BUTTON – This button turns the PITCH SLIDER function on and off.

13. TEMPO LOCK BUTTON - This button turns on or turns off the TEMPO LOCK function.

This function allows you to use the PITCH SLIDER to speed up or slow down playback

speed without altering the tonal pitch of the track.

14. PITCH RANGE BUTTON - Press the button to choose pitch percentage adjustment.

±4%, ±8%, ±16%, and ±100%. (Note: 100% does not work with MP3 music)

15. LCD DISPLAY – The high quality LCD display gives a clear indication of all the functions

as they occur (see LCD display section for more details).

16. FOLDER KNOB - Turn the FOLDER knob to search for the desired folder.

17. BPM BUTTON – To change between auto and manual BPM count.

18. TAP BUTTON - This button is used for manual BPM. When in manual BPM mode, tap this

button to the beat of the current track.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Citronic MPCD-X1 in the language / languages: English as an attachment in your email.

The manual is 1,9 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Citronic MPCD-X1 Manual

Product: