455907
4
Zoom out
Zoom in
Previous page
1/5
Next page
Operation
Each channel has a 3-band EQ (LOW/MID/HIGH), which can be used to balance the mix of frequencies and
emphasise certain aural characteristics in the signal. Adjust these as required, noting that and overall increase may
require an equivalent reduction of the GAIN control to compensate (otherwise clipping may occur from EQ boost).
Use the PAN control to position the channel input either to the left or right side of the stereo field. This can be useful
to help separate and define sounds within a mix but be aware that extreme settings can be counter-productive by
removing the channel from certain listening positions.
Use the AUX control to feed the correct amount of the channel signal to the AUX output. This routing is Pre-fader
and is independent from the channel fader setting.
For CM-LIVE models, there is an EFF control, which feeds a part of the signal to the internal delay effect. Overall
controls for DELAY (time between repeats) and REPEAT (number of repeats) are on the right-hand side of the
control surface - these can be adjusted as required. An EFFECT control adjusts the overall level of the delay effect.
If external effects are to be used, plugging a jack lead into the EFFECT output defeats the internal delay effect and
acts as a mono line level send to the external effect unit. The output(s) from the external unit will need to be
returned via a mono or stereo channel and added to the mix, whereby the channel fader takes the place of the
overall EFFECT level control.
Channel faders should be used to adjust the individual levels in the mix and the MAIN fader is for overall level.
Turn down amplifier levels when changing any connections or powering down the mixer to avoid speaker damage.
USB features
For the CM-LIVE models, The USB and SD card connection is for the internal media player, which can offer
playback of compressed digital audio files through the stereo channel. When a USB pen drive or SD card with such
files on is connected via the rear panel, the player recognises this and automatically begins playback through the
stereo channel. The player status is indicated by a small backlit LCD screen, as shown below
Transport controls allow navigation through tracks on the memory device. These are outlined below
For CM-STUDIO models, connecting a USB A to B lead from the rear panel USB connector to a USB port on a PC
or Mac computer allows audio to be transferred between the mixer and computer. The PC or Mac will recognise the
CM-STUDIO mixer as an external USB audio device and the mixer can be selected as an audio source within
recording software and as an output to the mixer, received as a main mix return. The firmware offers plug-and-play
compatibility with Windows XP/Vista/7 and OS/X onward.
A. Indicates media type (music/audio)
B. Indicates Play status (Play / Pause)
C. File / Folder indication
D. Bit resolution of file
E. Media source (USB / SD card)
F. Elapsed / Total track time
G. Track name
H. Spectrum output display
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Citronic CM4-LIVE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Citronic CM4-LIVE in the language / languages: English as an attachment in your email.

The manual is 0,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info