556056
26
Zoom out
Zoom in
Previous page
1/37
Next page
— 23 —
4.
MAINTENANCE AND TROUBLESHOOTING
4.1 Releasing Cutter Lock
Dropping of foreign object, paper jam or the like in the printer may cause a
cutter lock error. If the cuter lock error is slight, press the FEED button or use a
cutter lock release command to start the auto recovery operation. Auto cutter
returns to the initial position. Turning power on again can also recover the
initial position.
If the cutter lock error cannot be recovered with the above steps, use the
following procedure to remove the cutter lock error.
1. Tu rn the printer power off.
2. Apply your fingers onto the concaved places located at both sides of the
front cover and pull the cover.
3. If the front cover cannot be opened because the cutter blade is obstructed by
the operation panel cover, detach the hook located in the back and remove
the operation panel cover from the printer. Then, pull the front cover.
4. Open the front cover and remove the cause of the cutter lock.
5. Using a screwdriver, turn the white plastic screw at the right side to lower
the blade.
6. Set paper correctly, close the front cover, and then turn the printer power on.
Here, confirm that the ERROR LED is OFF.
CAUTION!
The print head is hot immediately after printing. DO NOT touch it with your hand.
DO NOT touch the heating element of the print head with a bare hand or metal object.
Be careful not to touch the cutter blade.
If the cutter lock error cannot be recovered even if you have tried the procedure of
pressing the FEED button or using a cutter lock release command several times, repeat
the above procedure from step 1. Avoid continuous operation under irrecoverable
condition.
Front cover
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Citizen CT-P292 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Citizen CT-P292 in the language / languages: English as an attachment in your email.

The manual is 1,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info