556056
28
Zoom out
Zoom in
Previous page
1/37
Next page
— 25 —
4.4 Hexadecimal Dump Printing
This function is to print all received data in hexadecimal numbers. If problems
such as missing data, data duplication, etc. should occur, this function allows
checking whether or not the printer is receiving data correctly.
Set paper to the printer and keep the front cover open. With the FEED button
pressed and held, turn the printer power on and then close the printer cover.
The printer prints “HEX dump print mode” followed by the received data printed
in hexadecimal numbers and some characters.
CAUTION!
The printer prints “.” if there is no characters corresponding to data.
During hexadecimal dump, functions except some command will be disabled.
If print data DOES NOT cover a line, press the FEED button to print the line.
Repeat pressing the FEED switch three times, and the printer prints “Completed”
and completes hexadecimal dump printing.
Print example
HEX DUMP PRINT MODE
1B 40 31 32 33 34 35 36 .@123456
37 38 39 30 0A 7890.
Completed
4.5 Resetting the Printer
This procedure restores the printer to the initial state or the state after powering
the printer on. This function is used in place of the power on operation necessary
for starting transition to various printer functions (4.3 Self Printing, 4.4
Hexadecimal Dump Printing, 5.3 Manual Setting of Memory Switches) without
the printer power switch. Reset the printer in the following procedure.
1. Open the front cover. With the ERROR LED kept lighted, repeat pressing the
FEED button three times. The printer starts resetting operation.
2. About 1 second after pressing the FEED button three times, all the LED
indicators go off. After about 1 second thereafter, the printer enters normal
operation and LED indicators go on depending on the status. If the printer is
in normal printable state, only the POWER LED goes on.
CAUTION!
Printer reset operation does not start under the error condition (4.6 Error Indication).
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Citizen CT-P292 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Citizen CT-P292 in the language / languages: English as an attachment in your email.

The manual is 1,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info