556065
40
Zoom out
Zoom in
Previous page
1/80
Next page
3-13
3.7 Ribbon Tension Adjustments
When the ribbon slips or wrinkles during printing, adjust the ribbon tension. The
printer has already been factory set with the ribbon width of 114 mm. When using
ribbon with a different width, adjust it according to the following procedure:
a) Hold the ribbon roll with one hand so that it does not turn.
b) Slightly push the knob toward the ribbon roll with the other hand and rotate the
knob until the stopper comes to the desired position.
c) Gradually release the knob so that the stopper fits in the groove on the knob.
Set values to each ribbon width:
Ribbon width
Ribbon winding
section
Ribbon feed
section
Tension
Adjustment when ribbon slips 5 5 Mild
25.4 mm (1 in)
4 4
50.8 mm (2 in) 3 3
76.2 mm (3 in) 2 2
101.6 mm (4 in): factory setting 1 1 Strong
d) After printing, check for ribbon wrinkle or slipping. If it occurs, adjust it further
according to the following procedure:
(1) When the ribbon wrinkles, the tension on the ribbon winding section
should be increased.
(2) When the ribbon slips, the tension on the ribbon feed section should be
decreased. If the problem is not resolved even when the tension on
the ribbon feed section is set to 3, the tension on the ribbon winding
section should be increased.
If ribbon problems are not resolved, consult our service personnel.
Ribbon feed section
Ribbon winding section
Variable knob
Mild
Mild
Strong
Strong
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Citizen CLP6002 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Citizen CLP6002 in the language / languages: English as an attachment in your email.

The manual is 0,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info