556065
39
Zoom out
Zoom in
Previous page
1/80
Next page
3-12
n Adjustments
Normally, the pressure on the left and right sides of the print head has already
been adjusted to equal loads at the factory. The check marks are located
under the upper frame window.
Adjustments are needed in the following cases:
1) When print on the left side is too light:
Turn the head pressure adjustment screw clockwise.
2) When print on the right side is too light:
Turn the head pressure adjustment screw counterclockwise.
3) When paper of smaller width is used:
In this case, the contact between the print head and the platen becomes
large, so the stepping motor will have a heavy load or the print head may
scrape the platen. To avoid this, turn the head pressure adjustment screw
clockwise to decrease the pressure on the right side of the print head.
In addition, adjustments will be useful for avoiding wrinkling of the ribbon or
skewing of the paper. For more information, contact our service
personnel.
Verification
window
Paper width Right head
pressure
1 inch
0 kgf
2 inches
0.5 kgf
3 inches
1 kgf
4 inches
2.4 kgf
Used for adjustments when
ribbon wrinkles or skews with
paper width of 4 inches
Factory setting
Head pressure adjust-screw
Upper frame window
Note: These values are just for reference.
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Citizen CLP6002 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Citizen CLP6002 in the language / languages: English as an attachment in your email.

The manual is 0,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info