556039
43
Zoom out
Zoom in
Previous page
1/69
Next page
43
Chapter 2 Printer Operation
Top Menu Sub Menu Default Menu Remarks
Paper Position 0.00 inch
0.0 mm
Peel/Cut/Tear O
0.00 to 2.00 inch
0.0 to 50.8 mm
Peel/Cut/Tear On
-1.00 to 1.00 inch
-25.4 to 25.4 mm
The stop position can be ne tuned using
this menu setting. The general stop position
is selected depending on the “Function
selected above.
Mode/Repeat Key Disabled LastOne
Disabled
Repeat method selection
LastOne:
Issues only the nal page.
In count case, it issues only 1 label while
continuing.
Disabled:
Makes the repeat key invalid.
Interface RS-232C Baud 9600 115200
57600
38400
19200
9600
4800
2400
Sets the baud rate of the serial interface.
Interface related settings are eective after
the power is turned on again.
RS-232C Parity None None
Odd
Even
Sets the communication parity of the serial
interface.
RS-232C Length 8 bits 8 bits
7 bits
Sets the character length of the serial
interface.
RS-232C Stop bit 1 bit 1 bit
2 bits
Sets the stop bit of the serial interface.
RS-232C X-ON Yes Yes
No
Selects the X-ON ow control of the serial
interface.
IEEE1284 On On
O
Enable or disables the enhanced’ features of
the IEEE1284 parallel interface.
Web Monitor* Auto Auto
On
O
Selecting the web monitor function.
USB Device Class Printer Printer
VCOM
Selects the USB device class.
USB VCOM Protocol Auto Auto
DTR
X-ON
Selects the protocol (ow control) when
operating USB VCOM.
USB 2.0 High Speed On On
O
Settings for enabling / disabling USB 2.0
High Speed.
* Displayed only when an optional LAN board is connected to a printer.
Mode Settings
[Zebra® Emulation]
43


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Citizen CL-S6621 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Citizen CL-S6621 in the language / languages: English as an attachment in your email.

The manual is 6,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info