556039
41
Zoom out
Zoom in
Previous page
1/69
Next page
41
Chapter 2 Printer Operation
Zebra® Emulation
Top Menu Sub Menu Default Menu Remarks
Global
conguration
Cong Set 1 Cong Set 1
Cong Set 2
Cong Set 3
Sets the Cong Set.
Page Setup Print Speed 6 IPS 2 to 6 IPS Printing speed setting.
Print Darkness 10 00 to 30 Print darkness setting
(printhead temperature)
Darkness Adjust 0 -10 to 10 Darkness command adjustment
Print Method Thermal transfer Thermal transfer
Direct thermal
Selecting thermal transfer (ribbon)/direct
thermal media
Ribbon Winding Outside Outside
Inside
Selecting the ribbon winding direction.
Continuous Media
Length
4.00 inch
101.6 mm
0.25 to 99.99 inch
6.40 to 2539.7 mm
Setting default length of continuous media,
if selected. ; the lower line is in metric mode.
Vertical Position 0.00 inch
0.0 mm
-1.00 to 1.00 inch
-25.4 to 25.4 mm
Print start position adjustment
Horizontal Shift 0.00 inch
0.0 mm
-1.00 to 1.00 inch
-25.4 to 25.4 mm
Horizontal printing location adjustment
Vertical Image Shift 000 dots -120 to 120 dots Adjust the o set value in vertical when
mapping data on a RAM.
Auto Side Shift 00 dots 00 to 15 dots Allows horizontal shifting of printing
position by specied number of dots per
page. Eective when load is applied to a
specic head area, like vertical lines.
Media Sensor See Through See Through
Reect
None
Label sensor selection
Small Media
Adjustment
O On
O
Setting for small labels
Small Media Length 1.00 inch
25.4 mm
0.25 to 1.00 inch
6.40 to 25.4 mm
Setting length of small label media
System Setup
Sensor Level
1.7 V 0.0 V to 3.3 V Setting the threshold of the sensor
Paper End Level
2.80 V 0.01 to 3.00 V Sets the paper end level.
Error Reporting On Printing
On Printing
Immediate
Setting for error report.
Buzzer Select On On
O
Setting buzzer sounding conditions
Metric/Inch Inch Inch
mm
Setting the units used
Max Media Length 10.00 inch
254.0 mm
1.00 to 99.99 inch
25. 4 to 2539.7 mm
Setting the maximum label length
Settings Lock O On
O
When on, prevents software commands
from changing the values set by the VuePrint
menu
Keyboard Lock O On
O
Prevents the control panel from aecting
the printer’s conguration. (User “lock-out”)
Mode Settings
[Zebra® Emulation]
41


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Citizen CL-S6621 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Citizen CL-S6621 in the language / languages: English as an attachment in your email.

The manual is 6,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info