665508
71
Zoom out
Zoom in
Previous page
1/90
Next page
71
Appendixes
Specications
Item Description
Printing Printing method Thermal transfer/Direct thermal
Resolution Main scanning line density: 203 dot / inch (8 dot / mm)
Sub- scanning line density: 203 dot / inch (8 dot / mm)
Head 864 dots (printable dots: 832 dots)
Max. print width 104 mm 4.1 inch
Max. print length
(For Datamax®
emulation)
2539.7 mm 99.99 inch
Max. print length
(For Zebra®
emulation)
4013.28 mm 158.00 inch
Print density Print density is adjustable with software
Printing speed Printing speed setting
2 to 8 inches per second (can be set in 1 inch unit) (Direct thermal)
• 7 to 8 inches per second with a print density of 10. Use of
thermal media is recommended.
• 2 to 6 inches per second when the optional peeler is used.
2 to 6 inches per second (can be set in 1 inch unit) (Thermal transfer)
Print mode Batch mode Normal printing (single or multiple sheets)
Tear o mode Feeds back media to the tear-o position after printing is completed.
Cut mode
*1
Prints while cutting at designated sheet units.
The following two kinds of cut mode operations are done.
• Backfeed
• Cut through (Cut through refers to stopping present printing
to cut the previous label when it reaches the cut position. After
cutting, printing restarts but a gap may be created at the seam
of the printing at this time.)
Peel mode
*1
Peels labels from the liners after printing them.
Media
*2
Types of media
Roll, fanfold (continuous media, die-cuts, continuous tags. paper or tickets)
Recommended media Thermal transfer: label media (LR1111 Lintec)
Direct thermal media: label media (150LA-1 Ricoh), tag media
(130LHB Ricoh)
Max. media width 118.0 mm 4.65 inch
Min. media width 19.5 mm 0.77 inch
Min. label width 19.5 mm 0.77 inch
Min. label pitch
*3
6.35 mm 0.25 inch
Max. media thickness 0.254 mm 0.01 inch
Max. media length 2539.7 mm 99.99 inch
Min. media length 6.40 mm 0.25 inch
Min. media thickness 0.0635 mm 0.0025 inch
On-board roll media
diameter
Max. external diameter: 203 mm
Media core: 25 to 76 mm
Min. media core external diameter
(when using label media)
External roll: 50.8 mm
Internal roll: 76.0 mm
8 inch
1 to 3 inch
2 inch
3 inch
71


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Citizen CL-E730 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Citizen CL-E730 in the language / languages: English as an attachment in your email.

The manual is 5,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info