665508
70
Zoom out
Zoom in
Previous page
1/90
Next page
70
Appendixes
Installing the Media (p.26)
Setting the Ribbon (p.30)
LED Functions (p.24)
Menu Setting Table (p.41)
Setting the Ribbon (p.30)
Ribbon Tension Adjustment
(p.61)
Ribbon Balance Adjustment
(p.63)
Ribbon Tension Adjustment
(p.61)
Cleaning (p.67)
Indication Check Corrective action
The printing
position
changes.
1) Are the media and
the ribbon correctly
set?
1) Correctly set the media and the
ribbon.
2) Is the platen dirty?
Is it deformed?
2) If it is dirty, clean it with ethyl
alcohol. If it is deformed, replace
it.
Note: Consult with the dealer that
supplied the printer concerning the
replacement.
3) Are the data contents
and the command
signals from the host
appropriate?
3) If an error message is displayed,
check the content of the software
and the communication status set
by the host computer.
4) Are the menu values
set appropriately?
4) Set the correct menu values using
the operating panel or the host
computer.
5) Are the sensitivities
of the media sensors
appropriate for the
media that is used?
5) Set the media sensitivity to
appropriate values.
If this does not solve the problem,
change the “Sensor level” that is
set in the “System setup.
The ribbon is
wrinkled.
1) Is the ribbon tension
suitable for the
ribbon that is used?
1) Adjust the tension with the
ribbon tension adjustment knob.
2) Is the ribbon used
correctly balanced to
the right and left?
2) Adjust the left - right balance with
the ribbon balance adjustment
knob.
3) Is the printing
density too high?
3) Set the appropriate printing
density using the menu or control
software.
4) Are the media
and ribbon there
commended
products or
equivalent products?
4) Use the recommended products
or equivalent products. If this
does not correct the problem,
contact a service representative.
The ribbon
slips
( ribbon dirt is
produced.)
1) Is the ribbon tension
suitable for the
ribbon that is used?
1) Adjust the tension with the
ribbon tension adjustment knob.
The ribbon
does not
wind.
1) Is the ribbon set in
the correct course?
1) Set the ribbon in the correct
course.
2) Is the ribbon winding
direction reversed?
2) Set the correct winding direction.
Troubleshooting
70


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Citizen CL-E730 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Citizen CL-E730 in the language / languages: English as an attachment in your email.

The manual is 5,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info