300974
144
Zoom out
Zoom in
Previous page
1/165
Next page
5-39
Linksys IP Phone Administrator Guide
Firmware Version 5.1
Chapter 5 Linksys IP Phone Field Reference
Ext Tab
Auth Resync-Reboot If this feature is enabled, the Linksys IP phone authenticates the sender when it receives
the NOTIFY resync reboot (RFC 2617) message. To use this feature, select yes.
Otherwise, select no.
Defaults to yes.
SIP Proxy-Require The SIP proxy can support a specific extension or behavior when it sees this header from
the user agent. If this field is configured and the proxy does not support it, it responds
with the message, unsupported. Enter the appropriate header in the field provided.
SIP Remote-Party-ID To use the Remote-Party-ID header instead of the From header, select yes. Otherwise,
select no.
Defaults to yes.
Referor Bye Delay Controls when the Linksys IP phone sends BYE to terminate stale call legs upon
completion of call transfers. Multiple delay settings (Referor, Refer Target, Referee, and
Refer-To Target) are configured on this screen. For the Referor Bye Delay, enter the
appropriate period of time in seconds.
Defaults to 4.
Refer Target Bye Delay For the Refer Target Bye Delay, enter the appropriate period of time in seconds.
Defaults to 0.
Sticky 183 If this feature is enabled, the IP telephony ignores further 180 SIP responses after
receiving the first 183 SIP response for an outbound INVITE. To enable this feature,
select yes. Otherwise, select no.
Defaults to no.
Auth INVITE When enabled, authorization is required for initial incoming INVITE requests from the
SIP proxy.
Referee Bye Delay For the Referee Bye Delay, enter the appropriate period of time in seconds.
Defaults to 0.
Field Description
144


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cisco spa941 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cisco spa941 in the language / languages: English as an attachment in your email.

The manual is 3,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Cisco spa941

Cisco spa941 User Manual - Dutch - 19 pages

Cisco spa941 Additional guide - Dutch - 8 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info