300974
143
Zoom out
Zoom in
Previous page
1/165
Next page
5-38
Linksys IP Phone Administrator Guide
Firmware Version 5.1
Chapter 5 Linksys IP Phone Field Reference
Ext Tab
SIP Settings
Note Some of the parameters in this section do not apply to the WIP310 wireless phone. Only the SIP Port
and SIP Debug Option parameters apply to the SPA901.
Field Description
SIP TOS/DiffServ Value TOS/DiffServ field value in UDP IP packets carrying a SIP message.
Defaults to 0x68.
SIP CoS Value CoS value for SIP messages.
Defaults to 3.
RTP TOS/DiffServ Value ToS/DiffServ field value in UDP IP packets carrying RTP data.
Defaults to 0xb8.
RTP CoS Value CoS value for RTP data.
Defaults to 6.
Network Jitter Level Determines how jitter buffer size is adjusted by the Linksys IP phone. Jitter buffer size is
adjusted dynamically. The minimum jitter buffer size is 30 milliseconds or (10
milliseconds + current RTP frame size), whichever is larger, for all jitter level settings.
However, the starting jitter buffer size value is larger for higher jitter levels. This setting
controls the rate at which the jitter buffer size is adjusted to reach the minimum. Select
the appropriate setting: low, medium, high, very high, or extremely high.
Defaults to high.
Jitter Buffer Adjustment Controls how the jitter buffer should be adjusted. Select the appropriate setting: up and
down, up only, down only, or disable.
Defaults to up and down.
Field Description
SIP Transport Select from UDP, TCP, or TLS.
Defaults to UDP.
SIP Port Port number of the SIP message listening and transmission port.
Defaults to 5060.
SIP 100REL Enable To enable the support of 100REL SIP extension for reliable transmission of provisional
responses (18x) and use of PRACK requests, select yes. Otherwise, select no.
Defaults to no.
EXT SIP Port The external SIP port number.
143


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cisco spa941 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cisco spa941 in the language / languages: English as an attachment in your email.

The manual is 3,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Cisco spa941

Cisco spa941 User Manual - Dutch - 19 pages

Cisco spa941 Additional guide - Dutch - 8 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info