605004
9
Zoom out
Zoom in
Previous page
1/10
Next page
9
Cisco 820 Series and SOHO Series Routers Cabling and Setup Quick Start Guide
78-13937-04
8: Congratulations! You’re Done!
3. If the web page still does not appear, verify that the PC is configured to automatically receive an IP
address. Follow the instructions in Step 4 in section “6: Check the PC Configuration.” If you need
more information refer to the Cisco Router Web Setup Troubleshooting Guide, which is available on
Cisco.com.
4. If the PC is configured to automatically receive an IP address, but the web page still does not appear,
select Start/Run, type winipcfg in the Run window, and examine the address in the IP address field.
The address should be in the format 10.10.10.X, in which X is a number that is 2 or greater; for
example, 10.10.10.2 or 10.10.10.3. If the IP address is not in this format, verify that an Ethernet
adapter name is visible in the Adapter field. If it is not, return to Step 3 in section “6: Check the PC
Configuration,” add TCP to the list of protocols. Then return to section “7: Configure the Router
with Cisco Router Web Setup,” and complete the procedure.
Step 4 If you have no special configuration requirements, click the Router Setup link on the home page, and
then click Quick Setup. (This may appear as Easy Setup on some models.) Then, enter the user name
and password provided to you by your Internet service provider, and click Apply.
Step 5 If you need to configure special features such as Network Address Translation (NAT), click the
appropriate links on the home page, and complete the configuration screens.
Step 6 Click the Password link on the home page, and set a password for the router.
Step 7 Click the Test Connection link on the home page, and allow the connection to be tested.
Step 8 Select Start/Run, and type winipcfg in the Open field of the Run window. When the IP Config window
appears, click Release, and then click Renew to release and renew the PC’s IP address.
Alternatively, open a DOS window, and enter ipconfig /release to release the PC’s IP address.Then enter
ipconfig /renew to renew the IP address of the PC.
Step 9 Open a web browser on the PC, and connect to a website.
8: Congratulations! You’re Done!
If you were able to connect to a website, you have completed the cabling and setup of your router, and
you can continue to use it to access the Internet.
If you need to configure more features, click the CRWS link for the feature you need to configure, and
enter configuration values for the router.
Related Documentation
For more information, refer to the following publications:
Cisco 827 and SOHO 77 Routers Hardware Installation Guide—Provides detailed cabling and
hardware information for the Cisco 827 and SOHO 77 routers.
Cisco 827 Routers Software Configuration Guide—Provides detailed configuration instructions for
the Cisco 827 and SOHO 77 routers.
Cisco 828 Router and SOHO 78 Router Hardware Installation Guide—Provides detailed cabling
and hardware information for the Cisco 828 and SOHO 78 routers.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cisco SOHO Series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cisco SOHO Series in the language / languages: English as an attachment in your email.

The manual is 0,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info