605004
8
Zoom out
Zoom in
Previous page
1/10
Next page
8
Cisco 820 Series and SOHO Series Routers Cabling and Setup Quick Start Guide
78-13937-04
6: Check the PC Configuration
6: Check the PC Configuration
Each PC that is connected to the router must be configured to use the Transmission Control
Protocol/Internet Protocol (TCP/IP) and to obtain its IP address automatically. Follow these steps to
configure each PC that is running Microsoft Windows NT or Microsoft Windows 95 or 98. If the PC is
running a different version of Microsoft Windows, refer to the documentation that came with the PC.
Step 1 Start the PC, and open the Control Panel.
Step 2 Click the Network icon to display the Network window.
Step 3 Verify that TCP/IP has been added and associated with the Ethernet adapter. TCP/IP is shown as a cable
icon in the Configuration window on Microsoft Windows 95 and 98; and as a cable icon in the Protocol
window on Microsoft Windows NT. If the icon is not visible, click Add, and add Microsoft TCP/IP.
Step 4 To verify that the PC is configured to obtain an IP address automatically, click the TCP/IP cable icon,
and select the IP address tab in the TCP/IP Properties window. If it is unchecked, check Obtain an IP
address from a DHCP server. The IP address and Subnet mask fields should be grayed out.
Step 5 To accept all changes and exit this window, click OK. Then click OK in the Network window.
Step 6 If you are prompted, click Ye s to reboot the PC.
For more information on how to configure TCP/IP, refer to the Cisco Router Web Setup Troubleshooting
Guide, which is available on Cisco.com.
7: Configure the Router with Cisco Router Web Setup
The Cisco Router Web Setup (CRWS) software is loaded on the router and should be used to configure
it to connect to the Internet. The CRWS software runs on Netscape version 3.0 to 4.7, and on Internet
Explorer version 4.0 or later. Follow these steps to start the CRWS software and configure the router:
Step 1 Start, or restart, a PC connected to one of the router Ethernet ports (1, 2, 3, or 4).
Step 2 Open a web browser. Make sure that the browser is set to work in online mode.
In Internet Explorer, click the File menu, and verify that the “work offline” option is unchecked.
In Netscape, the default selection in the File menu is set to work online.
Step 3 Type in the following universal resource locator (URL):
http://10.10.10.1
The home page of the router should appear after one or two minutes.
Tip If the CRWS home page does not appear when you enter the URL http://10.10.10.1, test the connection
between the PC and the router by doing the following:
1. Check that the OK LED on the router is on, and check the cable connection between the router and
the PC. Be sure that the TO HUB/TO PC button is in the correct position. The position is correct if
the LED for the port on the front of the router is on.
2. If the CRWS home page still does not appear, verify that the web browser’s “work offline” option
is disabled.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cisco SOHO Series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cisco SOHO Series in the language / languages: English as an attachment in your email.

The manual is 0,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info