300225

Cisco ip phone 7961 Manual

10
Zoom out
Zoom in
Previous page
1/17
Next page
• At the dial tone, dial the extension you
wish to answer.
Direct Extension Assignment
Direct Extension Assignment lets you
temporarily reassign a telephone with your
own telephone number and profile.
To Temporarily Assign Your Number
and Profile to a Phone:
• From the temporary phone, Dial 588
• Enter your complete telephone number +
#. If your phone is configured as an
extension-only (i.e., non-DID) line, enter
your company’s complete main
telephone number + * + your extension
number + #.
• Enter your phone password followed by
the # key
To Reassign the Original Telephone
Number to the Temporary Phone:
• Follow the steps above using the original
telephone number and password that
were assigned to the phone.
To Reassign Your Own Number and
Profile back to Your Own Phone:
• Pick up the handset of your phone
• After the voice prompt, enter your
complete telephone number followed by
the # key
• After the voice prompt, enter your phone
password followed by the # key
• Hang up
NOTE: Direct Extension Assignment requires
that the temporary phone is the same model
as your own.
Intercom
Intercom lets you make an announcement
through another person’s phone, allowing
them to respond instantly in hands-free mode
using their speakerphone.
To Make an Intercom Call
• Press the More softkey
• Press the Intcom softkey
• Dial the extension of the other party
• Their phone will beep and their
speakerphone will be enabled
NOTE: If the other party has Do Not Disturb
enabled, or if they are on the phone, you will
get a busy signal.
Night Mode
Companies often have different call
treatments for daytime versus after-hours
callers. The Night capability can be assigned
to a user’s phone to override the standard
day-of-week/time-of-day logic.
The Night feature has three modes:
Normal Night Mode
Calls will be handled using the standard day-
of-week/time-of-day logic. No action is
required by the user when operating in Normal
mode.
Temporary Night Mode
Temporarily overrides the normal day-of-
week/time-of-day logic. It toggles between
day-mode and night-mode. At the change in
the day-of-week/time-of-day schedule, the
system will revert back to Normal operation
• To enable Temporary Mode, press the
Night softkey once.
Permanent Night Mode
Overrides the normal day-of-week/time-of day
logic until the user manually changes the state
back to Normal
• To enable Permanent Mode, press the
Night softkey twice
• To disable Permanent Mode, press the
Night softkey twice again
Adjusting the Phone
To Adjust Display Contrast
• Press the Settings button
• Press 1 to select User Preferences
• Press 4 to select Contrast
To Adjust the Contrast Using the Up/
Down Softkeys
• Press the OK softkey
• Press the Exit softkey
To Adjust Ring Volume
• With the handset in the cradle and
speakerphone off, use the Volume
Up/Down buttons.
To Adjust Handset Volume
• Remove the handset from the cradle and
use the Volume Up/Down buttons.
• Replace the handset.
To Adjust Speakerphone Volume
• Press the Speaker button and use the
Volume Up/Down buttons.
• Press Speaker button again
To Adjust Ring Type
• Press the Settings button
• Press 1 to select User Preferences
• Press 1 to select Ring Type
• Highlight the desired ring with the Scroll
Up/Down buttons
• Press the Select softkey to select the ring
FeatureTel Cisco 7941/7961 IP Phone User Guide Page 8
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cisco ip phone 7961 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cisco ip phone 7961 in the language / languages: English as an attachment in your email.

The manual is 0,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info