300225
8
Zoom out
Zoom in
Previous page
1/17
Next page
Enter the desired 2-digit speed dial code
Speed Dial (for 7961 model only)
You can assign up a phone number to a
Speed Dial soft key.
Dial 74*
At the prompt, press a Speed Dial
softkey
Enter the phone number you want to
assign to this soft key and press #
After the prompt, press # and hang up
Dialing a Speed Dial Number
Get dial tone.
Press the Speed Dial soft key.
Call Block (Selective)
Selective Call Rejection lets you program your
phone to reject calls from a list of telephone
numbers.
To configure your Call Block List
Dial *60
Follow the voice prompts to enable or
disable the feature, or add the last caller
to the blocked list, or list blocked
numbers.
Call Forward (All Calls)
Call Forward (All Calls) lets you forward all
incoming calls to another number.
To Enable Call Forwarding
Press the Forward softkey.
Enter the phone number for the
forwarding destination. On external
phone numbers, include the Outside
Access Digit.
Press the Forward softkey again. The
number should appear on the LCD.
To Disable Call Forwarding
Press the Forward two times.
Call Forward (Busy)
Call Forward (Busy) forwards calls to another
number when you are already on a call.
To Enable Call Forward (Busy)
Dial 76*
Enter the phone number for the
forwarding destination followed by #
Press # to confirm
Press 2 to exit, then hang up
To Cancel Call Forward (Busy)
Dial 77* and then hang up
Call Forward (No Answer)
Call Forward (No Answer) lets you forward
calls when you don’t answer.
To Enable Call Forward (No Answer)
Dial 78*
Enter the extension or number for the
forwarding destination followed by #
Press # to confirm
Press 2 to exit, then hang up
To Cancel Call Forward (No Answer)
Dial 79* and then hang up
Call Forward (Out of Service)
Call Forward (Out of Service) automatically
forwards calls to another location when your
phone goes out of service. The forwarding
destination is configured through the Web
Portal or by FeatureTel.
To Enable Call Forward (OOS)
Dial 70*
Press # to confirm
Press 2 to exit, then hang up
To Disable Call Forward (OOS)
Dial 71* and then hang up
Call Forward (Selective)
Call Forward (Selective) forwards calls from
certain numbers to another number.
To Configure the Selective Call List
Dial *63
Follow the voice prompts to enable or
disable the feature, or add, delete, or list
numbers to be forwarded.
NOTE: Disabling Call Forward (Selective) will
not delete the Selective Call List. When
entering an external telephone number to the
list, enter the 10-digit number. Do not include
the Outside Access Digit.
Call Jump
Call Jump forwards a call already in progress
to another number.
Dial **# + phone number + # to send the
call to that phone number.
Dial **8 (**V) to send the call to voice
mail
Dial **0 to cancel an initial * or **
NOTE: This feature requires FeatureTel Web
Portal service. You cannot jump to or from an
emergency services number.
FeatureTel Cisco 7941/7961 IP Phone User Guide Page 6
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cisco ip phone 7961 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cisco ip phone 7961 in the language / languages: English as an attachment in your email.

The manual is 0,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info