298878
36
Zoom out
Zoom in
Previous page
1/66
Next page
28 OL-8166-01
Starting or Joining a Meet-Me Conference Call
Meet-Me conferencing allows participants to join a conference by calling the conference number
directly, rather than waiting for the conference initiator to call them.
To start a Meet-Me conference, use the MeetMe softkey on your phone, then dial the Meet-Me phone
number provided to you by your system administrator. To participate in a Meet-Me conference, dial
the Meet-Me phone number at a specified time. Conference participants hear a busy tone if they call
into the conference before the conference initiator has dialed in. Once the conference initiator has
dialed in, the Meet-Me conference is established and can continue even if the conference initiator
disconnects.
Forwarding Your Calls to Another Number
You can use Call Forward All to redirect your incoming calls from your Cisco Unified IP Phone to
another number.
Tip Enter the Call Forward All target number exactly as you would need to dial it from your desk
phone. For example, enter an access code such as 9 or the area code, if necessary.
If you want to... Then...
Establish a Meet-Me
conference
Press NewCall or go off-hook and press more > MeetMe. Dial the
Meet-Me conference number. (See your system administrator for a list
of valid numbers.)
Note: Remember to inform participants about the conference number,
so they can dial in. However, participants will hear busy tone if they
call the conference number before you have dialed in.
Join a Meet-Me conference Dial the Meet-Me conference number provided by the Meet-Me
conference initiator.
You can join the conference only after the initiator has dialed in.
End a Meet-Me conference Hang up or press EndCall.
If you want to... Then...
Set up call forwarding
from your phone
Press more > CFwdAll and enter a target phone number. The screen
displays “Forwarded to <target number>.”
Cancel call forwarding
from your phone
Press more > CFwdAll. The “Forwarded to <number>” message
disappears.
36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cisco ip 7912g at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cisco ip 7912g in the language / languages: English as an attachment in your email.

The manual is 1,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Cisco ip 7912g

Cisco ip 7912g User Manual - Dutch - 72 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info