298878
34
Zoom out
Zoom in
Previous page
1/66
Next page
26 OL-8166-01
Tips
When on-hook transfer is enabled, you can either hang up or press Trnsfer, then hang up.
If on-hook transfer is not enabled on your phone, be aware that hanging up instead of pressing
Trnsfer cancels the transfer action and places the party to be transferred on hold.
You cannot use Trnsfer to redirect a call on hold. Press Hold to remove the call from hold before
transferring it.
Making Conference Calls
Conference calling allows three or more parties to participate in a call simultaneously. Your
Cisco Unified IP Phone can support several types of conference calls depending on your needs and
your phone’s configuration. The following conference softkeys may be available on your phone:
Confrn—Use this softkey to establish conferences (3-16 participants) by calling each participant
individually. Standard conference calling is a default feature.
Join—Use this softkey to establish a conference (3-16 participants) among several current calls on
a single line. Standard conference calling is a default feature available on most phones.
cBarge—Use this softkey to begin a conference call (3-16 participants) on a shared line. This is an
optional feature available only for shared lines, and your system administrator must configure it
for you.
MeetMe—Use this softkey to host a conference (up to 100 participants, depending on your
configuration) Meet-Me conferences require participants to call an established number at a
specific time. This is an optional feature that your system administrator must configure for you.
See “Starting or Joining a Meet-Me Conference Call” section on page 28 for more details.
Talk to the transfer
recipient before transferring
a call (consult transfer)
Press Trnsfer and enter the target number. Wait for the transfer
recipient to answer. If the recipient accepts the transferred call, press
Trnsfer again. If the recipient refuses the call, press EndCall and then
the Hold button to return to the original call.
If your system administrator did not enable on-hook transfer, you must
press Trnsfer again to complete the transfer. To cancel the transfer,
press EndCall.
Transfer two current calls
to each other (direct
transfer) without staying on
the line
Scroll to highlight any call on the line and press Select. Repeat this
process for the second call. With one of the selected calls highlighted,
press DirTrfr. (You might need to press more to see DirTrfr.) The two
calls connect to each other and drop you from the call.
If you want to stay on the line with the callers, use Join to create a
conference instead. For details, see the “Making Conference Calls”
section on page 26.
If you want to... Then...
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cisco ip 7912g at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cisco ip 7912g in the language / languages: English as an attachment in your email.

The manual is 1,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Cisco ip 7912g

Cisco ip 7912g User Manual - Dutch - 72 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info