650695

Cisco Cisco SPA112 VoIP Manual

118
Zoom out
Zoom in
Previous page
1/136
Next page
Frequently Asked Questions
Cisco SPA100Series Administration Guide 129
1
Q. There is no dial tone, and the Phone 1 or 2 LED is not solid green.
STEP 1 Make sure the telephone is connected to the appropriate port, PHONE 1 or 2.
STEP 2 Disconnect the RJ-11 telephone cable from the PHONE port, and then reconnect it.
STEP 3 Make sure your telephone is set to its tone setting (not pulse).
STEP 4 Make sure your network has an active Internet connection. Try to access the Internet, and
check to see if the ATA WAN LED is flashing green. If you do not have a connection, then
power off all of your network devices, including the modem, the ATA, and the computers.
Wait 30 seconds. Then power on each device in the following order:
• Cable or DSL modem
• ATA
• Computers and other devices
STEP 5 Verify the settings on the Quick Setup page. Verify that you entered the account information
and settings required by your service provider. On the Voice > Info page, Line 1 or Line 2
Status section, verify that the Registration State is registered. If the line is not registered, check
with your ITSP to determine if additional settings are required.
Q. When I place an Internet phone call, the audio breaks up.
Consider the following possible causes and solutions:
• Network activity
There may be heavy network activity, particularly if you are running a server or using a
file sharing program. Try to limit network or Internet activity during Internet phone
calls. For example, if you are running a file sharing program, files may be uploaded in
the background even though you are not downloading any files, so make sure you exit
the program before making Internet phone calls.
• Bandwidth
There may insufficient bandwidth available for your Internet phone call. You may want
to test your bandwidth by using one of the bandwidth tests available online. If
necessary, access your Internet phone service account and reduce the bandwidth
requirements for your service. For more information, refer to the website of your ITSP.
… 118 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cisco Cisco SPA112 VoIP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cisco Cisco SPA112 VoIP in the language / languages: English as an attachment in your email.

The manual is 1,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info