650695
117
Zoom out
Zoom in
Previous page
1/136
Next page
1
Cisco SPA100 Series Administration Guide 128
Frequently Asked Questions
Q. I cannot connect to the Internet through the ATA.
STEP 1 Make sure that the ATA is powered on. The Power/Sys LED should be solid green and not
flashing.
If the Power LED is flashing, then power off all of your network devices, including the
modem, the ATA, and the connected devices. Wait for 30 seconds. Then power on each device
in the following order:
Cable or DSL modem
ATA
Connected Devices
STEP 2 Check the cable connections. Ensure that the cable in the INTERNET (WAN) port is securely
connected to the device that provides your Internet access, such as your modem or ADSL line.
On the Cisco SPA122, check the cable connection for the ETHERNET (LAN) port.
STEP 3 Check the settings on the Network Setup > Internet Settings page. Verify that you entered the
settings specified by your Internet Service provider.
Q. I upgraded my firmware and now the ATA is not working properly.
If the ATA is not working properly after an upgrade, you may need to perform a factory reset.
Use the Administration > Factory Defaults page to reset the ATA to the default configuration.
Alternatively, press and hold the RESET button for 20 seconds. All user-changeable non-
default settings will be lost. This may include network and service provider data.
Q. I cannot use the DSL service to connect manually to the Internet.
After you have installed the ATA, it will automatically connect to your service providers
network, so you no longer need to connect manually.
117


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cisco Cisco SPA112 VoIP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cisco Cisco SPA112 VoIP in the language / languages: English as an attachment in your email.

The manual is 1,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info