Manual Cisco Cisco SPA112 VoIP (page 88 of 136) (English)

650695

Zoom out

Zoom in

1/136

Configuring the Voice Settings

Line 1 and Line 2 Settings (PHONE 1 and PHONE 2)

Cisco SPA100 Series Administration Guide 96

Hook Flash Tx

Method

Select the method for signaling hook flash events: None, AVT, or

INFO. None does not signal hook flash events. AVT uses

RFC2833 AVT (event = 16) INFO uses SIP INFO with the single

line signal=hf in the message body. The MIME type for this

message body is taken from the Hook Flash MIME Type setting.

Default setting: None

FAX T38

Redundancy

Select the appropriate number to indicate the number of previous

packet payloads to repeat with each packet. Choose 0 for no

payload redundancy. The higher the number, the larger the packet

size and the more bandwidth consumed.

Default setting: 1

FAX T38 ECM

Enable

Select yes to enable T.38 Error Correction Mode. Otherwise select

no.

Default setting: yes

FAX Tone Detect

Mode

This parameter has three possible values:

• caller or callee: The ATA will detect FAX tone whether it is

callee or caller

• caller only: The ATA will detect FAX tone only if it is the

caller

• callee only: The ATA will detect FAX tone only if it is the

callee

Default setting: caller or callee.

Symmetric RTP Enable symmetric RTP operation. If enabled, the ATA sends RTP

packets to the source address and port of the last received valid

inbound RTP packet. If disabled (or before the first RTP packet

arrives) the ATA sends RTP to the destination as indicated in the

inbound SDP.

Default setting: no

Fax T38 Return to

Vo i c e

When this feature is enabled, upon completion of the fax image

transfer, the connection remains established and reverts to a voice

call using the previously designated codec. Select yes to enable

this feature, or select no to disable it.

Default setting: no

Field Description

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Cisco Cisco SPA112 VoIP in the language / languages: English as an attachment in your email.

The manual is 1,31 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Cisco Cisco SPA112 VoIP Manual

Product: