650695

Cisco Cisco SPA112 VoIP Manual

86
Zoom out
Zoom in
Previous page
1/136
Next page
Configuring the Voice Settings
Line 1 and Line 2 Settings (PHONE 1 and PHONE 2)
Cisco SPA100 Series Administration Guide 94
1
G729a Enable To enable the use of the G.729a codec at 8 kbps, select yes.
Otherwise, select no.
Default setting: yes
Silence Supp Enable To enable silence suppression so that silent audio frames are not
transmitted, select yes. Otherwise, select no.
Default setting: no
G726-32 Enable To enable the use of the G.726 codec at 32 kbps, select yes.
Otherwise, select no.
Default setting: yes
Silence Threshold Select the appropriate setting for the threshold: high, medium, or
low.
Default setting: medium
FAX V21 Detect
Enable
To enable detection of V21 fax tones, select yes. Otherwise, select
no.
Default setting: yes
Echo Canc Enable To enable the use of the echo canceller, select yes. Otherwise,
select no.
Default setting: yes
FAX CNG Detect
Enable
To enable detection of the fax Calling Tone (CNG), select yes.
Otherwise, select no.
Default setting: yes
FAX Passthru Codec Select the codec for fax passthrough, G711u or G711a.
Default setting: G711u
FAX Codec
Symmetric
To force the ATA to use a symmetric codec during fax passthrough,
select yes. Otherwise, select no.
Default setting: yes
DTMF Process INFO To use the DTMF process info feature, select yes. Otherwise, select
no.
Default setting: yes
FAX Passthru
Method
Select the fax passthrough method: None, NSE, or ReINVITE.
Default setting: NSE
DTMF Process AVT To use the DTMF process AVT feature, select yes. Otherwise,
select no.
Default setting: yes
Field Description
… 86 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cisco Cisco SPA112 VoIP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cisco Cisco SPA112 VoIP in the language / languages: English as an attachment in your email.

The manual is 1,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info