650695
40
Zoom out
Zoom in
Previous page
1/136
Next page
Configuring the Voice Settings
System
Cisco SPA100 Series Administration Guide 48
1
Miscellaneous Settings
Network Startup
Delay
The number of seconds of delay between restarting the voice
module and initializing network interface.
Default setting: 3
Field Description
DNS Query TTL
Ignore
In DNS packages, the server will suggest a TTL value to the client;
if this parameter is set to yes, the value from the server will be
ignored.
Default setting: no
Syslog Server Specify the syslog server domain name/IP and port. This feature
specifies the server for logging ATA system information and
critical events. If both Debug Server and Syslog Server are
specified, Syslog messages are also logged to the Debug Server.
Default setting: blank
Debug Server The debug server domain name/IP and port. This feature specifies
the server for logging debug information. The level of detailed
output depends on the debug level parameter setting.
Default setting: blank
Debug Level Determines the level of debug information that will be generated.
Select 0, 1, 2, 3, 3+Router, 3+Coma or 1+Coma from the drop-
down list. The higher the debug level, the more debug information
will be generated. Level 0 means that no information will be
collected. Levels 1, 2 & 3 generate messages related to the voice
ports only. Level 3+Router generates debug content for both voice
and router components.
Levels 1/3+ Coma generates vendors cordless debug content and
voice component.
Default setting: 3
Syslog Prefix Prefixes additional information to syslog with configuration set.
Default setting: blank
Field Description
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cisco Cisco SPA112 VoIP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cisco Cisco SPA112 VoIP in the language / languages: English as an attachment in your email.

The manual is 1,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info