650695
39
Zoom out
Zoom in
Previous page
1/136
Next page
Configuring the Voice Settings
System
Cisco SPA100 Series Administration Guide 47
1
System
Use the Voice > System page to configure general voice system settings and to enable logging
by using a syslog server. (Logging also can be configured in the Administration > Logging
pages. For more information, see Logging, page 113.)
Requirements for Logging
You need a computer that is on the same subnetwork as the ATA, to capture the log
files. This computer needs to be running a syslog daemon. Enter the IP address and the
port of this computer in the Syslog Server and Debug Server fields. Default port is 514.
You can deploy a syslog server to receive syslog messages from the ATA, which acts as
a syslog client. The syslog client device uses the syslog protocol to send messages,
based on its configuration, to a syslog server. The syslog messages can be accessed by
reviewing the "syslog.514.log" file which is the default name resides in the same
directory as the slogsrv.exe syslog server application.
Partners can download the Syslog Server for SPA Devices by using the link below
(login required):
www.cisco.com/en/US/partner/prod/collateral/voicesw/ps6788/phones/ps10499/
syslog_server_for_spa_devices.zip
Enter the settings as described below. After making changes, click Submit to save your
settings, or click Cancel to redisplay the page with the saved settings.
System Configuration
Custom CA Info The successfully downloaded CA information, or “Not
Installed” if no custom CA certificate was installed.
Default setting: Not Installed
Field Description
Field Description
Restricted Access
Domains
Domain that Cisco IP phones responds to SIP messages only from
the identified servers. Applicable to Line 1.
IVR Admin Passwd Password for the administrator to manage the ATA by using the
built-in IVR through a connected phone.
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cisco Cisco SPA112 VoIP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cisco Cisco SPA112 VoIP in the language / languages: English as an attachment in your email.

The manual is 1,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info